G2 Throttle Tamer Yamaha FJR 1300 / Super Tenere XTZ1200Z
G2's challenge was to improve control of over-responsive power characteristics of most fuel injected motorcycles. Their solution is the throttle tamer.
The Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The “pulley,” or as they call it, “cam,” pulls the throttle cable as the rider rotates the grip/tube. By altering the conventional, circular shaped cam, a vast improvement in control is achieved.
The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle. This virtually eliminates the jerky “throttle snatch” especially evident in modern fuel injected street bikes. The radius increases or “ramps up” after ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation.
- Machined from 6061 aluminum in the USA
- Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel
- Fits inside the stock throttle housing to stock cables
- Works with all known aftermarket cruise controls
- Slide your grip unto the Throttle Tamer
Note: Image for reference only. Actual G2 Throttle Tamer may vary depending on your bike's make and model. The G2 throttle tube replaces the OEM throttle tube. In some cases this will eliminate the OEM heated grips on your bike. Aftermarket heated grips may be used as an alternative.
|Product Style||RevZilla Item #||MFR. Product #||Availability|
|Product Style G2 Throttle Tamer Yamaha FJR1300 / Super Tenere||RevZilla Item #1105059||MFR. Product #40-4Y-152/60-370||AvailabilityIn Stock: Ships within 24 hours|