G2 Throttle Tamer Honda / Kawasaki / Yamaha
Zoom
MSRP
$79.95
Savings (10%):
$7.99
Price
$71.96

Select qty:

Add to Wish List

G2 Throttle Tamer Honda / Kawasaki / Yamaha

G2's challenge was to improve control of over-responsive power characteristics of most fuel injected motorcycles. Their solution is the throttle tamer.

The Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The “pulley”, or as they call it, “cam” pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved.

The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle.  This virtually eliminates the jerky “throttle snatch” especially evident in modern fuel injected street bikes.  The radius increases or “ramps up” after ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation.

Features:

  • Machined from 6061 aluminum in the USA!
  • Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel
  • Included cam is removable and can be replaced with alternate cams (sold separately) to fine tune control
  • Fits inside the stock throttle housing to stock cables
  • Works with all known aftermarket cruise controls
  • Slide your grip on to the Throttle Tamer

Note: Image for reference only. Actual G2 Throttle Tamer may vary depending on your bike's make and model.

4.4 / 5
Bang For The Buck
5 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
5 / 5
Durability
5 / 5
This Product Fits:
Honda
CB1000R 20082015
CB500F 2013, 2014, 2015
CB500X 2013, 2014, 2015
CB900F 919 20022007
CBR1000RR 20042015
CBR1000RR ABS 20042015
CBR1000RR Repsol 20042012
CBR1000RR SP 2014, 2015, 2016
CBR1100XX Super Blackbird 19972003
CBR250R 2011, 2012, 2013
CBR250R ABS 2011, 2012, 2013
CBR300R 2015, 2016, 2017
CBR500R 2013, 2014, 2015
CBR600F F4 1999, 2000, 2001, 2002
CBR600RR 20032015
CBR600RR ABS 20092015
CBR650F 2015
CBR900RR 19932001
CMX250C Rebel 2012, 2013, 2014, 2015
CTX1300 2014
CTX1300 Deluxe 2014
CTX 700 2014, 2015
CTX 700 DCT 2014, 2015
CTX 700N 2014, 2015
Grom MSX125 2014, 2015
NC700X 2012, 2013, 2014, 2015
NC700X ABS 2012, 2013, 2014, 2015
RVT1000R RC51 20002006
VFR1200 2010, 2011, 2012, 2013
VFR800A Interceptor ABS 19982013
VFR800A Interceptor ABS (Anniv. Ed.) 19982013
VFR800 Interceptor 19982015
VFR800 Interceptor (Anniv. Ed.) 19982013
VFR800 Interceptor DLX ABS 2014, 2015
Kawasaki
Ninja 250R 19972013
Ninja 300 2013, 2014, 2015
Ninja 300 ABS 2013, 2014, 2015
Ninja 650 2012, 2013, 2014, 2015
Ninja 650 ABS 2013, 2014, 2015
Ninja 650R 2007, 2008, 2009, 2010, 2011
Ninja ZX-10R 20082015
Ninja ZX-11 19901997
Ninja ZX-6 19901997
Ninja ZX-6R 20092015
Ninja ZX-7 19891995
Ninja ZX-7R 19911997
Versys 1000 2015
Versys 650 2013, 2014, 2015
Z1000 2010, 2011, 2012, 2013
Z1000 ABS 2014, 2015
ZG1000 Concours 19942006
Yamaha
FZ-07 2015, 2016, 2017
Product Style RevZilla Item # Manufacturer Product # Availability
G2 Throttle Tamer Honda / Kawasaki / Yamaha 949385 40-4F-130 In Stock: Ships within 24 hours

Shipping

Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.

Returns

If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
2.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
1
1
Bang For The Buck
1.3 / 5
Features
2.7 / 5
Style
3.7 / 5
Ease Of Install
2.7 / 5
Fit & Finish
3.0 / 5
Durability
2.0 / 5
Bang For The Buck
2 / 5
Features
2 / 5
Style
3 / 5
Ease Of Install
4 / 5
Fit & Finish
3 / 5
Durability
2 / 5
very disappointed...
New rider. was looking forward to this addition for my 2014 ninja 650r abs. easy install but no matter what i did when i put the kill switch housing back together the throttle sticks and does not snap back. tried for several hours with no luck
April 2, 2017
Purchased
4 months ago
Bang For The Buck
1 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
3 / 5
Fit & Finish
5 / 5
Durability
3 / 5
2012 Z1000
My z1000 was very jerky and after reading all the reviews and even thought the price was high I tried it out. No regrets works great tamed the jerkiness perfectly much smoother now. The only issue I had was that I had to sand down the face down just about .005 to stop it from binding in the housing. Quality is top notch would have been 5 stars if I didn't have to fit it but very happy with the product.
June 1, 2017
Purchased
4 months ago
Bang For The Buck
1 / 5
Features
1 / 5
Style
3 / 5
Ease Of Install
1 / 5
Fit & Finish
1 / 5
Durability
1 / 5
Very Disappointed
I am a new rider. I have a Honda CBR300R 2016 and I tried to install this myself but couldn't figure out to do it. So I took it to the Honda dealer where I bought my bike from. They had never seen this before, but were willing to install it for me. (Obviously at a cost). They thought it would take less than 30 minutes, however after 15 minutes of working on the bike they told me that the job was going to be much longer.

Apparently Honda's throttle cables are really tight and to install this it needs just a little more give than I had. I don't remember every detail they said after that, but it was labor intensive. It was a doable installation but it would take a lot longer. (Costing me a lot more). The mechanic and the salesman were very nice and patient. Both understood that I am a new rider and both told me that they believed that the cost of installation outweighed the benefits to having it installed. They reluctantly advised not doing it. (I say reluctantly because the owner was near by so they whispered that to me.) However the salesman, who also rides, told me give myself a little more patience. His thought was that I would install this, and then in 2 or 3 months I would regret it, and want the factor throttle back on it anyway. Costing me more.

After reading other reviews of the throttle tamer I think that this problem may be unique to the kind of motorcycle that I have, but I wanted to pass my experience on to any other new rider who is riding a Honda CBR300R who might be considering buying this. I'd stay away.
May 15, 2017
Purchased
3 months ago
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the G2 Throttle Tamer Honda / Kawasaki / Yamaha? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 28 questions Browse 28 questions and 20 answers
Why did you choose this?
RevZilla Store
Does just what it says
Mark W on Jun 24, 2017
Reviews say it works to smooth out the throttle, which is not very smooth at low speeds.
James P on Apr 11, 2017
Does just what it says
Mark W on Jun 24, 2017
My 2012 Kawasaki Z1000 is extremely jerky specially in 1st gear.
roger m. s on Apr 21, 2017
Reviews say it works to smooth out the throttle, which is not very smooth at low speeds.
James P on Apr 11, 2017
reputation
James G on May 27, 2016
My 2012 Kawasaki Z1000 is extremely jerky specially in 1st gear.
roger m. s on Apr 21, 2017
reputation
James G on May 27, 2016
What heated grips will work with this on a CTX1300?
A shopper on Oct 23, 2016