Feuling HP+ Oil Pump For Harley Milwaukee Eight

The Feuling high volume billet oil pump is a must have for the Milwaukee Eight engine. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. The Feuling oil pumps eliminate common pressure and scavenge issues associated with the factory oiling system. These oil pumps have a precision machined pressure relief valve and bore. Each oil pump is bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi.

Features:

• Billet 6061 aluminum with natural finish
• Increases oil pressure
• Increases Scavenge volume
• Reduces blow by & wet sumping
• Cooler oil & engine temperature
• More HP and Torque to the rear wheel
• Stock replacement
• High flow 2 chrome moly gerotor gears
• Magnets to help protect gears and pressure relief valve
• Feuling design, tolerances & material
• Made in the USA

Oil Pump For Water Cooled Engines

• 30% more pressure gear volume over stock
• 53% more scavenge gear volume over stock
• 42% more scavenge volume with matched passages, port sizing and holes to the engine case
• 68% more oil volume to the crankshaft and connecting rod bearing

Oil Pump For Oil Cooled Engines

• 27% more pressure gear volume over stock
• 27% more scavenge gear volume over stock
• 42% more scavenge volume with matched passages, port sizing and holes to the engine case
• 68% more oil volume to the crankshaft and connecting rod bearing

Note: Increased and optimized passages, port holes and galleys Require them to be matched up to a Feuling High Flow Camplate (sold separately)