Venture Heat 12V Heated Carbon Gloves

The Venture 12V Heated Carbon Gloves combined style, warmth, and performance together to create a motorcycle glove you are sure to enjoy.

On the inside is 3M Thinsulate insulation and a waterproof membrane to keep your hands warm and dry. To turn on the heat, simply touch the on-board temperature controller and enjoy 3 different heat settings. These heated motorcycle gloves will keep your fingers warm for as long as you can ride. If you need to pull over and take a call, the touch screen capabilities allow you to use your phone without having to take your gloves off.

The heating elements are carefully positioned around the perimeter of the hand to allow warmth to be circulated throughout your hand giving the comfort and protection you need. This great looking glove is made with premium leather and has built-in gel pads as well as a carbon fiber knuckle guard for ultimate comfort and protection.

Venture 12V Heated Carbon Gloves are powered by the existing battery of your motorcycle and will provide heat as long as you're on the road. Simply connect the harness to the terminals on the battery and run the coax cable underneath the body leaving the connector plug exposed. This non-intrusive configuration allows you to maintain the same look and feel to your bike without cables interfering. Pair the Venture Heat 12V  Gloves with the Venture Heat 12V Heated Jacket Liner or wear them on their own using the included Y-Splitter Cable.

Features:

• Built-in temperature controller
• Waterproof membrane
• Touch screen compatible
• Gel pads on pals
• Carbon fiber knuckle protection
• Flexible, ultra-thin micro fiber heating element
• Form-fitting cut to maximize amount of heat transfer
• 12 volt DC power
• Exterior made from leather and nylon
• 3M Thinsulate insulation
• Poly fleece liner
• Power consumption: 26.4 Watts (2.2 Amps) 

Included:

• 1 pair 12V heated carbon gloves
• 1 coax y-splitter cable
• 1 battery harness with safety fuse kit

Note: As a safety feature, if your motorcycle is outputting greater than 14 volts, it may cause the gloves to turn off. To prevent this, Venture Heat recommends first starting your motorcycle then plugging in the gloves. It should be noted that many motorcycles will operate at >14V, so it is recommended to check the voltage output of your bike before ordering.