S&S Cycle 560S Camshaft For Harley FL FX 1970-1977

S&S Cycle 560S Camshaft

Forged through hundreds of brutal hours on the dyno, the asphalt, and the track, these S&S cams are dialed in to unleash unapologetic, raw power the second you twist the throttle. This isn’t off-the-shelf guesswork—it’s precision-engineered muscle built to dominate every mile of pavement you take on.

Features:

• For 88" to 103" engines between 9:1 to 10:1 CR
• Recommend solid or performance aftermarket hydraulic lifters, stock hydraulic tappets are not recommended
• Not recommended for stock displacement or lower compression engines
• Best response from 3500 to 6000 rpm
• Spring spacing required
• Made in the USA

Cam Specs:

• Intake Lift: 0.560"
• Exhaust Lift: 0.560"
• Intake Lift at TDC: 0.168"
• Exhaust Lift at TDC: 0.164"
• Intake Open: 20°
• Intake Close: 55°
• Exhaust Open: 60°
• Exhaust Close: 20°
• Intake Duration: 255°
• Exhaust Duration: 260°