RAM Mounts Stem Base Hardware Kit

RAM Mounts Stem Base Hardware Kit

The RAM Mounts stem mount hardware pack provides the hardware needed to install your fork stem motorcycle base on a new bike. The pack includes a rubber expansion plug, plastic washers, lock washers, a screw and nut. This hardware pack allows for installation of the Fork Stem Motorcycle base into the cylindrical bore wall of fork stems that measure from 12 -20mm and 28mm or 0.5” – 1.10” at the following intervals:

Metric       Standard
12mm          0.5”
14mm          0.55”
16mm          0.63”
18mm          0.71”
20mm          0.79”
28mm          1.10”

Note: This is a hardware kit only and does not include a 1" RAM Mounts Ball