Pit Bull Hybrid Dual Lift Stand BMW F800ST / Suzuki V-Strom 650 / Yamaha R3 / R1

Pit Bull Hybrid Dual Lift Stand BMW F800ST / Suzuki VStrom 650 / Yamaha R3 / R1

The Pit Bull Hybrid Dual Lift Stand is based upon a modular design and can be easily converted to lift from the forks OR the lower triple tree by simply swapping out a few parts (included) in a matter of seconds. The Hybrid Dual Lift Front Stand features 7 indexable height adjustments, which is very desirable when removing the forks on your motorcycle or even when lifting a bike with uneven forks from underneath the forks. The upper portion of the Hybrid Dual Lift features a threaded 6mm hole which will allow you to install a simple 6mm bolt to serve as a caliper holder. Made to last until the end of time this Pitbull stand is constructed primary of heavy-duty steel and finish with a highly durable zinc-plating. 

Features:

• Available in three handle types: Non-Removable, Removable, and Extended Removable
• Removable handle allow for a smaller overall footprint and creates less of a tripping hazard in front of your motorcycle
• Both removable handle and non-removable handle measures 12" inches
• Extended handle measures 15" inches for increased leverage
• Made in the USA

Note: Always use in combination with a rear stand.