Motogadget m-Switch Switch Housing For 7/8" Bars
Zoom
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Black Housing/Black Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Black Housing/Black Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Black Housing/Black Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Black Housing/Stainless Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Polished Housing/Black Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Polished Housing/Stainless Buttons
  • Motogadget m-Switch Switch Housing For 7/8" Bars - Polished Housing/Stainless Buttons

Please select a Type and Finish to check availability, or to add this item to your Shopping Cart or Wish List.

Select Type:

Select Finish:

Price
$99.00

Select qty:

Please select a Type and Finish to view availability.
Add to Wish List

Motogadget m-Switch Switch Housing for 7/8" Bars

Ditch your ugly plastic OEM switches for CNC'd stealthy simplicity. Employ this German-engineered universal push button switch housing to handle your switching needs. Three button option adds a third button on the front side facing away from the rider.

Features:

  • CNC machined from billet aluminum
  • IP65 spraywater-proof certified against rain ingress
  • Two-piece clamp on design for ease of installation
  • Universally installs on the right or left
  • Outer diameter: 49mm (1.9")
  • Width: 20.5mm (0.81")
  • Momentary switches, normally open, 2 amp maximum

Note: 2 amps is a moderate current capacity. Check the load requirements of your circuits. This is best paired with a switching relay like a Motogadget m-Unit.

Resources:

5 / 5
Bang For The Buck
4.5 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
4 / 5
Fit & Finish
5 / 5
Durability
5 / 5

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

Product Style RevZilla Item # Manufacturer Product # Availability
3 Button / Black Housing/Black Buttons 1122330 MG4000325 In Stock: Ships within 24 hours
3 Button / Black Housing/Stainless Buttons 1122331 MG4000326 Only 2 Left: Ships within 24 hours
3 Button / Polished Housing/Black Buttons 1122332 MG4000327 In Stock: Ships within 24 hours
3 Button / Polished Housing/Stainless Buttons 1122333 MG4000328 In Stock: Ships within 24 hours
2 Button / Black Housing/Black Buttons 1122322 MG4002025 In Stock: Ships within 24 hours
2 Button / Black Housing/Stainless Buttons 1122323 MG4002026 In Stock: Ships within 24 hours
2 Button / Polished Housing/Black Buttons 1122324 MG4002027 Available: Requires 3-5 business days lead time prior to shipment
2 Button / Polished Housing/Stainless Buttons 1122325 MG4002028 In Stock: Ships within 24 hours

Shipping

Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.

Returns

If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Bang For The Buck
4.5 / 5
Features
5.0 / 5
Style
5.0 / 5
Ease Of Install
4.0 / 5
Fit & Finish
5.0 / 5
Durability
5.0 / 5
Bang For The Buck
4 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
3 / 5
Fit & Finish
5 / 5
Durability
5 / 5
Super slick!
While I think these are a bit pricey I must admit that the quality of build seems second to none. They work exactly as advertised and I'm deeply enjoying these over any other controls I've had installed on my bike.

Three things to note:

1 - As stated in the product description you need to use a switching relay with these. You can't just swap out your factory controls, hook these up and ride off into the sun. I went with the motogadget m-unit for a perfect pairing.

2 - I had a difficult time getting the switches to ground using the supplied set screw to hook the ground wires up to the switch housing. In the end I ran a ground wire for each switch all the way back down the bars to my main wiring harness.

3 - Since you need to route the wiring through your bars for these I do not recommend these with ace or cafe bars. Feeding the wire bundle through a 90 degree hard bend in your bars so all your cabling comes out the center between your risers is a PAIN.

If you DO opt to give this a go (like I did) drill a hole in your bars larger than what the instructions recommend. That extra space will help you. I then suggest using electric tape to bundle up the wire to each control right to the tips of the wire. In that bundle also tape in a nice heavy piece of twine. Feed the twine through the center hole in the bars toward the side you're placing your control and fish it though the opening you've made for the wires at the end of the bar. Pull the whole lot through. It'll take some spirited tugging. Leave yourself just enough wire to get your switches hooked up and then you should be able to stuff it back into the bar to get your control housing flush.
June 15, 2016
Purchased
1 year ago
Bang For The Buck
5 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
5 / 5
Durability
5 / 5
You can't go wrong with motogadget!
Creme da la creme! Paired with an m-unit this 3 button switch is sexy, sleek and seems to be able to take a beating. The only thing I don't like is the ground connections running inside the switch itself, I'd reccomend running to a frame ground as not to be guessing what happened when something doesn't work! Buy these switches if you're having any doubts.
June 1, 2017
Purchased
3 months ago
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Motogadget m-Switch Switch Housing For 7/8" Bars? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 2 answers
Why did you choose this?
RevZilla Store
Sleek profile for my bars and I needed the switches to go with the mUnit I purchased.
Andrew R on Mar 30, 2017
Sleek profile for my bars and I needed the switches to go with the mUnit I purchased.
Andrew R on Mar 30, 2017
will it fit standard bars bars ?
A shopper on Jun 14, 2016
BEST ANSWER: These are available in both 7/8 inch and 1 inch specs. Just make sure you know the thickness of the bars you're trying to fit before you order. (They work a treat by the way!)
Has anyone tried these with a classic britbike that has positive ground electrics?
A S on Jul 8, 2017