MadStad Engineering Adjustable Quick-Release Windshield System For Harley FXFB 2018-2023

MadStad Engineering Windshield System For Harley

MadStad's patented adjustable windshield system is now a quick-release made for the Low Rider. The adjustable brackets allow the rider to adjust the height and angle of the shield to dial in the smoothest possible ride so you can look over the shield, not through it, even at highway speeds. It snaps on and off of our custom fork brackets in seconds, no tools required, and locks in place securely. The sturdy stainless steel fork brackets mount solidly to your fork pinch bolts and provide the mounting base for our adjustable bracket system. A horizontal brace holds the brackets solidly together with a center deflector that blocks airflow coming over the headlight, even if you raise our shield. This lets you set the shield for your own height and riding position without a center blast of air to ruin your wind protection.

Features:

• Quick-release mounting base
• 3/16" (4.5 mm) thick cast acrylic
• The quick-release mounting base gets installed onto your handlebar clamps
• Made in the USA

Note: These are general recommendations and can vary depending on your inseam, seat height and riding position.

Rider Height       Shield Size

5'8" to 5'10"             18"

5'11" to 6'2"             20"

6'3" and taller          22"