Fitted a 10 inch black handle Bar on 2015 STREET GLIDE CVO, perfect rise, no need to change cables, Fitted at the local Harley dealer ( BTW I live in DUBAI ).perfect fit. Attached a pic.

So I debated between these and the Yaffe monkey bars. If price is a concern, go with these. Price wasn't in my decision, but what sold me was the pull back on these (granted, I had not seen either of these two in person before purchasing). The grip angle on these was exactly what I was hoping for when buying new bars, and I have less strain on my wrists when pulling in the clutch or braking due to the reduced angle of the pullback.

Revzilla shipped quickly as always, and I did the install this weekend. Surprisingly, the internal wiring was not that difficult with these. Small hiccup on the throttle side, but after off-setting some of the plugs and tightening with electric tape, they actually fished through pretty easily.

I bought the 10" in black for my '15 SGS, and this puts the grips slightly below the fairing. This is an extremely comfortable riding position, and to me, the bike handles a lot better than with the stock bars. FYI, i'm 6' tall.

It was a lengthy install being my first time taking on this type of project, but there's a video by Ride It Wrench it on youtube that made the install much easier than it would have been. One day of working on this was much better than paying HD a small fortune, and now having done this, I'm confident I'll be able to tackle this type of project much quicker in the future.

Installed these myself and they look awesome. Bought the 12" bars and they sit just above the fairing. You still have access to the stock mirrors, so if you don't want to add mirrors, there is no need to. Wiring internally is easy, would recommend a little grease on the wires and they go smooth.

The bars are great! The chrome finish is nice and looked very cool on the bike. The 12 in. bars can be installed with out cutting or splicing wires and no need for wire extenders. They feel great and gave me better handling of the bike. Very happy with the LA Choppers Twin Peaks

Awesome bars. Clean welds, and clean smooth finish. I installed 12" black bars on my 2017 SG. There was no need for wire extensions or longer hydro lines. Due to the amount of wire left after fishing the wires through the bars, 12" would be the highest you would be able to go without extending wires and hydro (clutch/brake) lines.
Install was straight forward thanks to YouTube. The hardest part was running the electrical through the bars, specifically the throttle side. I had to use grease to get those puppies through.
All in all great buy, I would totally recommend to anyone.
I had considered the Paul Yaffe monkey bars, but the LA Chopppr Twin Peaks pullback fit my riding style and comfort better.

Purchased this for my wife. She has a 2015 Street Glide. This product is definitely quality stuff and looks great. The only points that I would make is:
1) some of the controls needed to be re-routed into the bars to reach. But honestly, I do not consider that a bad thing.
2) make sure when you are adjusting the bars, you install the tank first. We found out afterwards that with the wheel turned to the stop position, the bars just touch the side of the gas tank. We will now need take apart the faring to re-adjust the bars slightly.

I bought the 14" rise for my 2016 Street Glide. The bars sit just above the fairing. I'm 6-2 and these bars are at a perfect height for me. I would recommend them.

Awesome bars. Very very comfortable. I did the 12 inch bars (I'm 5' 11") and the height and angle of your hands/wrists is spot on for me. It got rid of that upper back and shoulder ache I got with the stock bars after riding a while. I had one little issue and that was a blemish in the paint, but its at the bottom and is mostly hidden by the fairing. Not really noticeable at all. One thing is with the 12 inch bars that I did is i took out the plastic "plate" under the radio and cut the zip ties to get the length needed to plug in the wires from the controls. It was a pain but it is very clean and no splicing needed. Install took me about 8 hours but I a have massive OCD with wiring and stuff so it took a while but definitely could be done quicker. Vie got a 2016 street glide special

Great set of bars, highly recommend. I installed mine with the Arlen Ness bushings. Went on a 2018 streetglide special, did not have to modify anything. Great fit.

Nice bars.. Fast Shipping.. Opened these bars up and was impressed ever since taking out of the box. They make the stock HD bars look like they came off a my childhood BMX bike.. Seriously... If I was sent those stock bars? Id be upset..

Haven't pulled wires yet, but I'm gathering that although it will be difficult it wont be impossible..

Looking forward to longer rides.

Stock Mirrors are not blocked, I'm 5'10".. Was told 12" mirrors would be ok also.. But with 14" you'll have no issues.