Kraus Radial Caliper Titanium Hardware Kit

Kraus Radial Caliper Titanium Hardware Kit

Use these kits to properly space and mount radial brake calipers to Kraus Caliper Mounts. The 12-point high grade Anodized G5 Titanium flanged bolt allows for increased torque and holding power and corrosion resistance while decreasing weight and offering premium performance.

Features:

• G5 Titanium
• 2.5mm Aluminum Spacers stack to form all commonly needed spacing
• Each kit will mount one caliper
• Torque specs: 47 ft lbs (65 nm)
• These bolts kits are designed to run with Kraus caliper mounts
• Made in the USA

60mm kit:

• Two Titanium 12pt. bolts (M10 x 1.25 x 60mm)
• 8 Stackable 2.5mm Spacers
• Allows for a total caliper spacing of 0mm-10mm
• Use with Dynamoto Front Radial Caliper Mounts and 11.5" or 11.8" brake rotors

70mm kit:

• Two Titanium 12pt. bolts (M10 x 1.25 x 70mm)
• 14 Stackable 2.5mm Spacers
• Allows for a total caliper spacing of 10mm-18mm
• Use with Kraus Rear Radial Caliper Mounts and 11.5" or 11.8" brake rotors
• Use with Dynamoto Front Radial Caliper Mounts and 12.6" (320mm) brake rotors
• Use with KRT Radial Caliper Mounts and 11.8" brake rotors

80mm kit:

• Two Titanium 12pt. bolts (M10 x 1.25 x 80mm)
• 22 Stackable 2.5mm Spacers
• Allows for a total caliper spacing of 20mm-28mm
• Use with KRT Radial Caliper Mounts and 12.6" (320mm) brake rotors
• Use with Front Axial To Radial Caliper Mounts and 12.6" (320mm) brake rotors