Flash Tune Bench ECU Flashing Kit Suzuki Hayabusa GSX13000R

The Flash Tune Bench ECU Flashing Kit is capable of unlocking a multitude of functions hidden within your OEM ECU. The Bench kit includes a aux power supply and a ECU to USB adapter harness that allows you to make changes your OEM ECU when it is removed from your motorcycle. You will no longer need to send away your ECU to get flashed!

Flash Tune believes everyone deserves the same tuning technology that was once reserved for factory riders. With FlashTune's software you can remove restrictions that the factory must put in place to meet strict street vehicle regulations. By flashing your ECU you are able to tune your bike without interfering with critical correction factors.

The Flash Tune Bench ECU kit combined with FlashTune's Software not only allows control of fuel maps, but also functions such as rev-limiter, top speed limiter, O2 sensor on/off, AIS valve and fan on/off temp. Another great feature that is not found anywhere else on the market is the ability to edit the deceleration map. Most if not all stock maps cut all fuel when the throttle is closed, by adding small amounts of fuel during deceleration it smooths out weight transfer and keeps the chassis settled, resulting in a faster lap time.

FlashTune ECU Tuning Software, installation guides and additional ECU licenses are available at www.ftecu.com.

Flash Tune allows control over the following:

• Remove ECU restrictions
• Engine braking adjustments
• High load fuel maps (with PC3 and PC5 map importing)
• Low load (cruising) fuel maps
• Fuel injector proportioning
• Ignition timing
• Immobilizer function
• Cooling fan temps
• Rev-limiter control
• Remove top speed limiter
• Electronic steering-damper settings
• Speedometer calibrations

Note: Once this kit has been registered with Flashtune, it can not be returned nor be transferred to a new user. Functions will vary by model. FlashTune Software for PC only. For closed circuit racing use only.