Feuling HP+ Cam And Lifter Kits For Harley Milwaukee Eight 2017-2025

Feuling HP+ Cam And Lifter Kits For Harley

Feuling® HP+ camshaft kits include Reaper camshaft, HP+ lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for install of the factory one piece pushrods and or our optional and recommended heavy duty HP+ one piece pushrods. Feuling® fastener kit is also highly recommended to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs.

Cam Info:

• 405 Cam is a workhorse, producing a wide powerband increasing torque and HP throughout the entire RPM range when compared to stock. Direct bolt in replacement for Milwaukee Eight engines, can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or complete exhaust system and a high flow air cleaner. Feuling® recommends using free flowing mufflers with smaller cores for best lower RPM power and pull. RPM range 1,700-5,700

• 465 Cam is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock. This direct bolt in replacement for Milwaukee Eight engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train. Cam will also respond well with increased bore and or compression. RPM range 1,850-5,950