My ride: 2018 HD SGS

We already know the stock bulbs suck: relatively dim and that typical incandescent slow illumination. These LEDs are instant on and super-bright. It took me a bit of time to install because I wanted to be very meticulous. Here are some tips:

1) When you remove the stock bulb, take note of the alignment of the 1157 guide pins. Just re-insert the stock bulb and twist to install so you know how to install the new LED's 1157 base.

2) The instructions are correct when it mentions to push in the existing reflectors. Use a blunt edge or your thumbs. Do not use a flat screwdriver like in some tube videos; that will scratch the reflector. Although the new LEDs will cover the existing internal reflectors, if you ever decide to remove the LEDs (e.g. sell the bike, and sell the LEDs separately), you want to make sure the reflectors are in as-new shape.

3) If you buy the front and rear set, you can use the stock smoke front lenses on the rear signals. The LED fronts come with smoke lenses. Adds a nice touch to smoke 'em all around.

4) When all installed, you'll notice that the dash blinkers will flash more quickly than the front/rear signals. Turn your bike ignition on (but don't start the bike). Turn on the hazards and let them blink for about 30 seconds or more. This will reset the dash blinkers so that the blink rate will match the turn signals.

Safe riding, Friends!

These LED replacements are extremely bright, and thus more visible to oncoming and following cars. I like how the front lights are white but turn amber when the turn signal is used. Not sure why they're so expensive but I think any increase in safety that comes with improved visibility makes the investment worthwhile.

Utilizing the forward white lights when the turn signals aren't activated is brilliant and adds safety with enhanced visibility to other drivers. The lights are very bright and easy to install. One tip on install, ensure you twist the wires several times (at least 4). If not, the wires can interfere with the lights seating against the housing and not allow enough space for the covers to close properly. If you're trying to reinstall the covers and they're not closing flush with the housing, this could be why. Great product overall and I feel safer riding with them.

These lights are all they're said to be and more ...
Revzilla helped me thru the buying process , the final price was great and delivery was swift...

Got this set for my 2018 HD Low Rider and the rear bulbs are the wrong ones. The bulbs in the kit are both 1157 bulbs. My bike uses 1156 in the rear so the bulbs sent did not rotate in the socket. I had to return this item due to wrong information from Revzilla.