Antigravity Micro-Start Battery Harness Kit

Antigravity Micro-Start Battery Harness Kit

The Antigravity Micro-Start Battery Harness Kit was made so that a rider or driver can easily jump start their vehicle using just the Micro-Start Power Supply without the need for the clamps, or removing the seat on your motorcycle. It is a 12" (300mm) harness that connects directly to the battery while the other end can plug directly into the Micro-Start unit. It adds convenience and saves time if the situation arises when you have to jump start your vehicle. Just connect the Micro-Start directly to this harness and jump-start your vehicle.

A standard Battery Tender type Harness WILL NOT handle jump-starting, the wire gauge is much too thin, and it will melt the wires.

Features:

• One 12" long Micro-Start harness harness
• Only compatible with original design Micro-Start XP-1, XP-3, Sport or XP-5

Note: The Micro-Start is for jump-starting only through the jump start port. Never leave the Micro-Start connected to your vehicle's battery or use in place of your regular battery. Do not try to charge the Micro-Start directly from your battery through the jump start port. Severe damage can result. NOT compatible with the XP-10 or newer versions of XP-1 and XP-3. See last image to confirm which version you have.