Shoei GT-Air 3 Realm Helmet

The Shoei GT Air 3 Helmet represents the next generation of touring helmets. Starting in the wind tunnel, the sleek Advanced Integrated Matrix fiberglass shell showcases a balance of strength and lightness. Using "Silent Ride Engineering", the aerodynamic ride of the GT Air 3 are further supported by the 3-D Max-Dry cheek pad and liner system, included chin curtain and optional, shell-integrated SRL3 Bluetooth system (sold separately). 

The GT-Air 3 ships with a clear, fog-resistant CNS-1C face shield with Pinlock lens insert included. An internal drop-down QSV-2 sun visor provides wide, full spectrum coverage from harsh solar rays. Tighten the micrometric ratcheting chin strap, hit the road, and go. Versus the model that it replaces, at speed the GT Air 3 sports an 11% decrease in lift and - most importantly - a 6% reduction in frontal wind resistance over the GT Air 2.  The GT Air 3 is an unparalleled blend of sport, comfort and touring. 

Aerodynamic Shell Design:

• Shoei's top full-face touring helmet
• Revised gasket seal for even better protection from noise and weather intrusion
• Real world and wind tunnel testing to improve aerodynamic properties - exceeding riders’ feedback from GT-Air 2 predecessor
• Firmer shield detents to keep shield in place in every scenario 
• Multi-piece EPS liner enhances impact absorption and ventilation
• Molded air spoiler reduces drag and lift as well as diminishes pressure on the rider’s neck while riding at speed
• Integrated comm system base accepts the Shoei SRL3 Bluetooth Communicator by Sena

Advanced Integrated Matrix (AIM):

• High performance fiber materials combined with elastic organic fibers to create a shell structure that is ultra-lightweight, rigid and resilient
• Three shell sizes: XS-MD, LG, XL-2XL

CNS-1C Shield System:

• CNS-1C three-dimensionally curved face shield is both wider and taller than the shield it replaces
• Includes CWR-1 Evo Pinlock Anti-Fog Lens insert
• Dual-ridge window bead increases contact with the shield to reduce wind noise
• Scratch-resistant shield coating
• 99.9% protection from harmful UV A&B rays

Sun Shield Visor System:

• Built-in QSV-2 sun shield gives riders instant relief from sun glare in one quick motion
• Visor meets ANSI Z80.3-2010 standard for non-prescription eyeglasses
• Large and easy to reach slider activates the 3D injection-molded inner sun shield
• Distortion-free shield blocks 99% of harmful UV rays

Ventilation System:

• Redesigned upper air intake vent positioned to maximize air volume into the helmet interior
• Enlarged lower intake vent with filter reduces shield fogging and increases ventilation
• Upper and lower intake vents are easy to operate even with gloved hands
• Rear/neck vents allow for effective air exhaust
• Breath guard and chin curtain included

Interior System:

• 3-D Max-Dry center pad and multi-layered, polyurethane foam cheek pads
• Chin curtain prevents wind entry and reduces noise
• Cheek pads are replaceable or removable for maintenance
• Eyeglass compatible interior
• E.Q.R.S. (Emergency Quick-Release System) helps emergency medical personnel to remove the helmet

Micro Ratchet Chin-Strap:

• 100% stainless steel micrometric ratcheting chin strap
• Quick, smooth and easy to operate

Safety Certification:

• DOT

Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.