NOCO G750 Battery Charger

NOCO Genius G750 Battery Charger

The NOCO G750 Battery Charger automatically diagnoses, recovers, charges and maintains your batteries using a 5-Step System. The G750 is best for small battery applications from 1.2-30Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G750 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks

Powered by NOCO's VosFX Processor. This is a revolutionary smart processor utilizing sophisticated levels of intelligence to alter the charge process based on the organic feedback from the battery to extend battery life. The VosFX Processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery.

Features:

• Returns to last selected mode when restarted
• Automatically adjusts itself to changing current needs
• Protects against reverse polarity, short circuit, open circuit, spark, overheat, overcurrent and overcharge
• Safely charges any type of lead-acid battery including Wet, Gel, MF and AGM batteries
• Plug-n-play connectors for easy accessory changes
• Lightweight and compact
• Charges batteries 2X faster than traditional linear battery chargers
• 100% full charge even with varying A/C input voltages
• Automatically shuts off if charger remains in Bulk charge mode for an extended period of time
• Includes G750 Charger, Battery Clamp Connectors, Eyelet Terminal Connectors, Manual, and User Guide

5-Step System:

• Step 1: Diagnostics - Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process.
• Step 2: Soft Start - Begins Bulk charging process with a gentle (soft) charge.
• Step 3: Bulk - Continues Bulk charging process, returns 90% of battery capacity.
• Step 4: Absorption - Brings the charge level to 100%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing.
• Step 5: Maintenance - Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and then will discontinue the charge cycle. Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely.