Givi E370 Tech Monolock Top Case
I just got one of these for my KLR 650. Installing it was way easier than I thought it would be. The universal mounting plate lined up with 2 factory bolts on the rack. Just needed to get 2 longer bolts. The size is 6mm. The length is about 2 inches. Bolted it down with those and drilled two holes in the back of the rack and it was done. Took me 15 minutes once I had the right bolts. Fit mine with the backrest which was also very easy with the template they send with it. Fit and finish is excellent and it looks great. A really nice piece for 160 bucks!
May 6, 2016
Purchased this over some of the more expensive top cases and am very happy with it. Comes with the universal mounting plate, was a little tricky putting that on but it is universal so that is to be expected. Finish is nice, looks to be of very good build quality. Installed the case before a 1400 mile trip through lots of rain at times. Kept my things dry, works very well..
April 27, 2016
I've only had the case for a few days but it has been a great addition to the bike.
The price was decent and the size is pretty good. I can fit my size large leather jacket, rain coat, riding gloves, and a bottle of water in it. Or my full face, and everything minus the jacket.
I have wind tested it at 116 mph and it's still here.
It can hold more than six pounds. I tested it today with a 24 pack of 16 oz bud light and as much fireworks as would fit, plus a six foot cable and padlock, plus hat, and hotdogs, lol. Did about 96 mph on the way home with no trouble.
My only gripe, and I almost returned the case over it, is that the universal mounting plate that comes with it does not have any mounting holes that line up with the Givi bracket for my bike. I found that if I removed the rubber grommets, that I could catch two through bolts that will keep the plate from sliding off the bracket. I used some stick on plastic bumpers for cabinet doors on the mounting plate to make up for the factory ones I had to remove. Maybe I'll update with pics..
Long story short be prepared to get creative with the install, I figured universal ment clean install to givi products, able to be rigged to anything, but basically your gonna have to rig universally lol.
For the price savings though, well worth the fuss.
July 4, 2015
Nicely sized. In this case perfect for a maxi-scooter
Tried an 26 liter with a claim of fitting full face helmet... It did fit HJC but not Shoei.
Considered other lower cost options but upon this (my 2nd Givi) but the fit, finish and operation (locks etc) were all simply solid.
April 13, 2015
Solid case and size for the money
I use this on my 2009 Triumph Tiger 1050, along with a SW-MOTECH Alu-Rack Toprack and the included adapter that came with this topcase. Installation was a breeze.
It fits my Large Helmet and Rev-It Air jacket when I am at work, and my briefcase and shoes on my way to work. Much cheaper alternative than oem Triumph top case and it pairs nicely with my factory Triumph side bags as well.
Only issue is that every so often the locking mechanism will allow me to lock, but have a harder time unlocking if I really stuff the case.
November 23, 2014
This topcase was easy to install and has worked out great for my needs, its waterproof and carries everything I need.
September 15, 2014
Perfect size with quick removal
I have a Yamaha XT250 and needed a tail box that was big enough for my flight bag. I use my XT to go to the airport and back and this holds my flight bag and extra clothes with no problem. It is waterproof which is also important to protect my headphones and gps. I was sick and tired of screwing around with bungee cords and this bag is the perfect solution. Revzilla always comes through with very quick shipping and has plenty of info to make you confident will meet your needs.
August 28, 2014
Givi box was exactly as described - fit was easy, backpad easily installed. Box holds my helmet raingear and still room for a jacket and a few small items
June 10, 2013