Competition Werkes Fender Eliminator Kit Kawasaki ZX6R 2009-2012
The license plate Bracket is nice and looks good
Was pretty easy to install even though the instructions it comes with aren't very clear. Now for the turn signals it comes with are very cheap made they lasted one full day and then one of the bulbs when out do to hyper flashing they don't come with a flash relay or load resistors. tried looking for the bulb that was the right wattage and voltage and the only place i could find them was on eBay from over seas and even on there own website that sells the turn signals have no replacement part for it so just do your self a favor and get LED turn signals with a flash relay much nicer
September 9, 2015
This was a lot easier to install than I thought. The instructions while a bit terse were still pretty easy to follow. You don't need a stand to install it and if you've never taken your seat and fairings off like me its a great opportunity to learn. Rewiring the tail lights was a snap (be sure to leave plenty of slack in the wire in case you make a mistake). Overall though I'm beyond satisfied with my purchase.
April 9, 2015
Works well! (2012 zx6r)
Simple yet fairly sturdy designed fender eliminator. Very easy to install. The turn signals are very bright and mount sturdily on the license plate bracket, unlike other fender eliminators I have purchased. Not much bulk added and makes the bike look 100x better than with the ugly stock fender.
September 15, 2014
Good fender elim, useless signals
This is a perfectly good replacement for the fender, and mounts the plate nicely, really cleaning up the look of the bike. The finish is basic metallic, but the unit itself is so small and out of the way you barely see it.
Installation was pretty easy. You take half the tail apart, which is pretty straightfoward, then yank the signal wires and tag light. Four bolts removes the fender and you replace it with this (which is the biggest pain, since you line up two plates and then try to bolt them in against gravity). Having another pair of hands helps.
The tag light is tiny and dim, and unfortunately you must at least cut your factory tag light wire. This is the only permanent modification required (assuming you want a tag light, which I did).
I was nearly done installing this on my 2012 ZX6r when I realized that the included turn signals look like garbage and there was no way I'd be using them. They attach to the frame via one bolt and a bracket, look tacky, and feel cheap. Your milage may vary.
I made the mistake of installing this without rear signals, knowing that I would want to add an integrated taillight later. Save yourself some time and, if you plan on doing an integrated taillight, order that at the same time as this and do it all at once. The hardest part of the install is the bolts to hold the plate frame, and I ended up doing that twice because I did the integrated taillight as a separate installation.
This plus an integrated taillight makes for a very sweet setup on the 6r. I really wouldn't bother with the included turn signals (reason for lower bang for buck), which look cheap.
June 4, 2014
Took about 45 minutes to take the bike apart install and get it back together, defenitly alot nicer then the big stock luggage rack and defenitly worth the money. Would suggest it to anyone trying to get a nice new look
July 3, 2013
Just installed this kit on my 2013 ZX6-R b/c the only kit I could find for it was the yoshi kit and the turn signals looked as big as stock uhhg... 2012 kit fit. Install was fairly easy (did it on my lunch break) if your are at all mechanically inclined but if your not you can def still manage
The finished product looks so much better than stock. Extremely happy so far.
Pics of Before and after below
February 26, 2013