Log In / Register
Cart (0) Checkout
Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008
Select qty:
Your Savings (10%):
Your Price

Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008 (Not Monster 696 or 1100)

This kit relocates your license plate to the rear of your bike, below the tail light.

  • This kit is made from CNC cut, quality stainless steel
  • Relocates stock License light and turn signals
  • Requires cutting the subframe
  • Hardware and detailed photo instructions included
  • This product installs in around an hour, and requires basic hand tools.

NOTE: Please check local laws before purchasing. Some modifications may be prohibited in some states.

This Product Fits:
Monster 1000 20022008
Monster 1000 Dark 2002, 2003, 2004, 2005, 2006
Monster 1000S 2002, 2003, 2004, 2005, 2006
Monster 400 19972005
Monster 400 Dark 2002, 2003, 2004, 2005
Monster 600 19932005
Monster 600 Dark 19932005
Monster 600 Metallic 19932005
Monster 620 2002, 2003, 2004, 2005, 2006
Monster 620 Dark 2002, 2003, 2004, 2005, 2006
Monster 620 Matrix 2002, 2003, 2004, 2005, 2006
Monster 620S 2001, 2002, 2003, 2004, 2005
Monster 695 2007
Monster 750 19932005
Monster 750 Dark 19932005
Monster 750 Metallic 1993
Monster 800 2002, 2003, 2004, 2005, 2006
Monster 800 Dark 2002, 2003, 2004, 2005, 2006
Monster 800S 2002, 2003, 2004, 2005, 2006
Monster 900 19932005
Monster 900 Cromo 19932005
Monster 900 Dark 19932005
Monster 900S 19932007
Monster S2R 20022008
Monster S2R 1000 2005, 2006, 2007, 2008
Monster S2R 800 20022008
Monster S2R Dark 20022008
Monster S4 20012009
Monster S4 Fogarty 2002, 2003, 2004, 2005, 2007
Monster S4R 2005, 2006
Monster S4RS 2006
Monster S4RS Testastretta 2007, 2008
Monster S4RS Tricolore 2008
Monster S4R Testastretta 2007, 2008
Write a Product Review for a chance to win our monthly $100 giveaways.
Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008 4.5 5 47 47
Good luck... Installed on a 2011 Monster 796. The instructions for this could have been better. You get step-by-step instructions through about half the install, then you just get blurry black and white photos that barely depict the steps, which made installing this a real pain. I called Competition Werks and they weren't very helpful either. The guy just said it had been over 4 years since he looked at the bike and he couldn't remember. Also kept stating that this job should be comlpeted by a trained technican. I have done all the work on my bike, and it isn't rocket science. Overall, this does make the bike look better, but again the instructionss are really horrible. Fast shipping and good customer service from Revzilla though. July 21, 2014
Great fit, great look Comp works makes a solid fender eliminator for the 2012 Yamaha FZ6r. Fitment is near perfect, there is a little tricky movement involved when replacing the plastic pushpins that are near the tail-light. LED blinkers look great. They are bullet connectors so either a bit of modifying or a purchase of bullet-to-Yamaha OEM connection harnesses are needed. Removes that nasty OEM tail fender though! July 21, 2014
Can do better, CW ! The kit is easy to install, instructions are pretty straight forward but you might get a headache on the electrical wiring, as they don't quite provide what's needed (there's 6 wires to connect, they provide on 2 butt plugs!). The indicators provided are pretty low quality, so expect to change them pretty quick. I have very bad luck and one of the bulb was dead when I received my kit. No big deal though as they are a couple bucks only to replace. Overhaul it's a good product. Really cleans the tail of my Street Triple. If you're a little handy and have the right tools, you can probably built it yourself. June 11, 2014
Not what I expected but did the job Thought it was a remove and replace product, but there was come cutting involved with the fender. Overall good product, if you know how to fabricate metal, then you can make your own. June 9, 2014
Good fender elim, useless signals The Good: This is a perfectly good replacement for the fender, and mounts the plate nicely, really cleaning up the look of the bike. The finish is basic metallic, but the unit itself is so small and out of the way you barely see it. Installation was pretty easy. You take half the tail apart, which is pretty straightfoward, then yank the signal wires and tag light. Four bolts removes the fender and you replace it with this (which is the biggest pain, since you line up two plates and then try to bolt them in against gravity). Having another pair of hands helps. The tag light is tiny and dim, and unfortunately you must at least cut your factory tag light wire. This is the only permanent modification required (assuming you want a tag light, which I did). The bad: I was nearly done installing this on my 2012 ZX6r when I realized that the included turn signals look like garbage and there was no way I'd be using them. They attach to the frame via one bolt and a bracket, look tacky, and feel cheap. Your milage may vary. I made the mistake of installing this without rear signals, knowing that I would want to add an integrated taillight later. Save yourself some time and, if you plan on doing an integrated taillight, order that at the same time as this and do it all at once. The hardest part of the install is the bolts to hold the plate frame, and I ended up doing that twice because I did the integrated taillight as a separate installation. In summary: This plus an integrated taillight makes for a very sweet setup on the 6r. I really wouldn't bother with the included turn signals (reason for lower bang for buck), which look cheap. June 4, 2014
Tail Chop Tuesday Competition Werkes provides all the hardware needed to be rid of the eyesore. April 15, 2014
Looks super clean, easy to install. This product looks great, the blinkers and wiring work well, the license plate light is a LED which looks good, and it completely cleans up the look of the bike. The directions could be a little more clear on how to get to the wiring for the blinkers, I ended up cracking the plastic not knowing how to remove the 2 pins on the underside of the right cover. May 27, 2014
Good Product, although not enough research and development. I purchased mine for a 2011 BMW S1000rr. Pros- Cleaned up the tail nicely and angled the License plate well also. Durable material. Cons- Light kit causes a LAMP! code to activate. Which can be deactivated on the bike if you have a 2012 model or newer s1000rr. If you have an older model or if you have a new model and want the lights to work correctly and blink at a normal speed, then get it deactivated at the Dealership. Which they did for me for free. They also can set the bike up so the canbus works with LED lights 2012 and up. Another thing is that with this kit, there is nothing to cover the previous hole for the wiring harness which the yoshimura kit does have and you have to drill a hole in your bike as well for the license plate light. No wire wrap. They should have included some shrink wrap for what we paid! Helpful notes: To install this properly and have your tail fit normally, than some slight modification is required to the bolts that hold the fender eliminator in place. The original fender has 3 M5X35 bolts with spacers that hold the fender eliminator in place. You need to cut 1/3 off of two of the bolts and use it to install the new eliminator. These bolts go directly into your subframe. You could also pick up 2 M5X20 bolts if you want to spend an extra dollar. The blinkers should be in position but not mounted securely in the blinker brackets yet. They should be left hanging with the wires in place but the bolt/fitting out. Install the bolt/fitting last as it will block the mounting holes for the fender eliminator. Hope this helps and Cheers! May 27, 2014
2 3 4 5 6 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008
Already Asked: 4 Questions, 13 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Benjamin M: For look purposes Jun 1, 2014
Amy G: Looked. at many eliminator kits online that claimed they were for ducati. This is the only one that actually shows a ducati rear fender so I know it's the right part. Looks like quality parts as well. Mar 14, 2014
Capt. William D: good price & easy web site to use Jan 14, 2014
andrea p: I figure it should make my 2001 Ducati moster S4 look a little more modern and agressive... Sep 6, 2013
Product Style RevZilla SKU ID Manufacturer Product # Availability
Competition Werkes Fender Eliminator Kit Ducati Monster 1995-2008 884441 1DMON In Stock: Ships within 24 hours