Sena SMH-10 Helmet Clamp Kit For Speakers And Earbuds With Attachable Boom Microphone Wired Microphone
Sena put together a great product offering with the A0306 clamp bracket.
Replaced my original clamp bracket because my helmet has a reverse curvature where the clamp was installed, it left a gap between the clamp and the surface of the helmet which caused the failure. The new SMH10-A0306 clamp bracket is easy to install and if used as a replacement for the standard clamp bracket, offers much more flexibility of how you like to hear your music or communications. I wish that SENA would use this style clamp as a standard with their SMH10 system. Using your own earbuds has the advantage of better quality sound and isolation of ambient noise such as wind and traffic. Simple change from in helmet speakers to ear buds by just plugging one or the other into the clamp kit.
November 30, 2015
Excellent accessory to a great product
I bought this to update my existing Sena SMH10 setup. I've used my Sena for the last six years without a problem. I just didn't like the bracket that came with it when I originally purchased it. This allowed me to reconfigure my setup on my helmet, and move the old bracket to my son's helmet. Sena makes excellent products and I'd recommend them to anyone looking for easy to use, intuitive Bluetooth comm systems.
August 31, 2015
One every helmet
I have this on everyone of my helmets. It makes swapping the module easy.
Protip - get some acoustic concert earplugs. You can hear everything on the sena speakers better, and lose all the road and wind noise.
May 8, 2015
Very happy with this product
The sound is so much better with being able to use the earbuds
November 17, 2014
Use of earbugs (with sound reduction) make highway travel a breeze!
My wife and I have used the sena smh10 units to communicate between bikes for several years. Great product. However, the speakers are just ok sound wise and you really have to use max volume to hear at freeway speeds (75-85 mph here in Texas).
Using earbuds with built in earplug is great for cycling. Cuts enough windnoise that freeway speeds aren't taxing and you can still hear voice communications or music well.
These units made our recent long trip much more enjoyable!
October 6, 2014
Good product with some flaws..
I have the Sena SMH-10 system on two helmets currently. It was recommended by a friend. Overall I've been happy with the product especially with its ease of use. It only takes a little while to install on your helmet and a few minutes to figure out its functions and off you go.
The sound is as good as you would expect through the speakers. Meaning you can hear everything you need to above wind noise but if you want HiFi you need buds. This makes the option to swap very good.
The biggest problem I have with Sena is their reliance on cheap parts. On my previous sets (and why I replaced them with this one) the wires are EASILY frayed and start to cut out. They have re-designed the wiring to keep it from bending so much but I can already tell the wires are made from the same cheap plastic/rubber and will break again, probably sooner than later. Others have complained about this as well, so I know I'm not the only one with this concern. Dang Sena, step it up...you are so close to a great product. Spend some money on better material!
I do recommend this product but only with the caveat that you can expect to replace the clamp kit.
July 30, 2014
I like the product except...
Overall, the Sena helmet clamp is what I expected with one exception. I bought this clamp to put on a Modular helmet. The one that came with my Sena SMH 10 that I bought a while ago did not have a microphone boom that would fit in my Modular. Everything is great except I do not understand why the connection to the ear-buds isn't the standard 3.5 mm. It comes with an adapter, so I can use it, but there is about 4 inches of wire sticking out the bottom of the clamp which is a bit odd, but not any real problem. I do love my Sena SMH 10 though...
July 21, 2014
Installed on Nolan N44/ AWESOME!!!
This is way louder than my original Sena SMH10 unit. The versitility is great. LOVE THIS THING.
Put in on an Nolan N44 with the sticky mount just behind the Nolan comm. mount on the left side. Works great.
June 24, 2014