Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Drop us your email and we'll let you know when it's in.
Not unless you absolutely need right angle.
The right angle Powerlet is vastly inferior to their straight plug.
The minor issue is that there are only two ground connections vs. 4 on the straight plug.
The big problem is the internal wiring. Unless you are connecting very small wires, like 26 - 28 awg, you're going to have problems making the internal connections. There are two tiny screws and no clamping plate to grab the wires. You can barely see them in the catalog photos.
I ended up modifying it quite a bit to make it work. Crimped small ring terminals to the wire, cut away internal plastic and some metal, bent the ring terminals to be right angle and got it all working.
April 27, 2015
Best Plug Powerlet Makes
I have a variety of Powerlet products on my FJR1300 and Husqvarna with a many electronic device ends to match. The right angle male plug is my go to plug for powered tank bags on both bikes, battery tenders in the garage, and portable inflators. The right angle plug is better than the straight-on because it provides power wire relief as well as reduce obstruction with bits of motorcycle like the handlebars.
The only niggly bit is if you run 12 gauge premium nautical wire with thick insulation--there's a bit of interference with with assembly and either have to dremel out a little material or go with 14 gauge wires. I had one wire come unhooked once and found myself a bit frustrated at 4 a.m. with a flashlight and pocket knife trying to screw the terminals back together. But, that's niggly.
Powerlet products are FAR superior to cigarette lighters for positive contact power needs.
February 7, 2014
Have a functionality, fit, or otherwise product-specific question about the Powerlet Right Angle Plug? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.
Frank R:The male plug part fits (the metal center pin and annular metal electrode) into a standard powerlet female receptacle/socket or same as if you have a BMW the sockets they use . The other end where it is split allows you to wire in a two wire connection/lead using the two screw terminals. The two halves shown cover and clamp the wire securely. The advantage of the right angle is its low profile and ability to more readily direct the wire lead at an angle
The powerlet socket can be googled to see what it looks likeNov 9, 2014