Log In / Register
Cart (0) Checkout
Woodcraft Clip-Ons
Zoom

Please select a Size to check availability, or to add this item to your Shopping Cart or Wish List.

Color:

Select Size:

Size Chart
Select qty:
MSRP
$154.99
Your Savings (5%):
$7.75
Your Price
$147.24
Please select a Size to view availability.

Woodcraft Clip On Bars

Woodcraft 2 piece split clipons are specially designed to make installation and removal a snap. The 2 piece design is race-proven and makes it easy to service your clipons below the triple clamp, without having do dis-assemble the entire front end. Special attention has also been taken to save weight wherever possible.

For these smaller sizes like this Woodcraft includes custom shells that fit securely inside a set of 35mm clipons.

All kits include 7/8 diameter and 12" length bars that are easily adjustable to whatever width you desire.

For fitment information please consult Woodcraft's Clip-On Sizing Chart.

Note: Please consult the Woodcraft Clip-On Application Guide before ordering.

View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

Write a Product Review for a chance to win our monthly $100 giveaways.
Woodcraft Clip-Ons 4.7 5 16 16
Not great for 04 R6 The hardware for the 2 part bracket won't fit into the cut outs on the top triple. I had to use these under the triple, but then the bar hit the bodywork. Finally bought a different set that had one piece clamps. So, great product, for a different bike. September 30, 2014
better than stock Woodcraft products are excellent, that goes without saying. This install is certainly involved, it does require some drilling when you remount all of the handlebar accessories, but that is no big deal. Measure twice and drill once and you should be fine. The handlebars are longer than stock and the amount of leverage gained is certainly noticeable. September 29, 2014
Best clipons for the Buck Excellent clip ons, easy to instal and adjust. They feel very sturdy. I would like them to come in black as well. August 18, 2014
Phenomenal clip on bars. Not the cheapest, but highly recommended. Great bars. The three piece design makes it so you don't have to pull your top triple tree and if you damage the bars, you don't have to replace the whole assembly. I have them on two different bikes and will continue to purchase them for any future clip-on installs. August 8, 2014
3 piece is nice! I upgraded my stock clip-ons and I was looking for a 3 piece design. I wanted to be able to change my clip-ons without having to take of my triple tree....these were perfect. good quality and easy to install. I hope I never have to test the ease of replacement. And they were priced well. July 13, 2014
Once they are setup they are amazing! Getting them setup correctly was a pain but they feel amazing once setup. I recommend getting some weighted bar ends since the tube are very very light. January 28, 2014
Great so far? Other than the fact if you are putting any aftermarket clip-on on your bike it requires dropping the forks out of the way to slide the stock clip on mount off. Basically a lot of unrelated work but very much worth it in the event of a crash, hence why I bought these. They are three pieces and have a great fit. Hopefully I won't be testing them any time soon in terms of breakage from a crash. January 20, 2014
Great improvement over stock I really like these clip ons. They are a lot lighter than stock, have a much better angle ( almost flat), and are wider. They do scratch kinda easily, over over all these are super nice. May 28, 2013
2 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Woodcraft Clip-Ons? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Woodcraft Clip-Ons
Already Asked: 13 Questions, 30 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Richard T B: crashed, needed new clip-ons and these had the features that I wanted. Sep 29, 2014
Klint K: I like the modular design and have a set on another bike. Great product. Jul 16, 2014
Erik S: replaceable components for racing Jun 28, 2014
William W: Good reviews, liked previous parts from the same company. Mar 25, 2014
A S asked: Will these give me the same riding position as stock? If not, is there one there another version which would do so? May 13, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Lorenzo T: They may very well give you the same riding position as stock; however, the great thing about the Woodcraft clip-ons is their near infinite adjustability. Most stock clip-ons are not designed with any adjustability and therefore as a rider you are stuck with what the manufacturer deemed as the "best compromise" for a wide range of riders. If you want the Woodcraft clip-ons in the same position as the stockers, you can do that. But take my advice, and play with the adjustability a little bit, until you find that perfect riding setup for you. It will increase your comfort and control and will allow you to focus on other aspects of your riding. May 14, 2014
Reply to Lorenzo Good answer? Yes (0) No (0)
Khaled S: It depends on your bike. If your OEM handlebars did not have a rise to them, these would be the same. If your stock ones do have a rise, woodcraft makes ones with a one inch rise. Both my GSXR 1000 and CBR 1000rr have a small rise. I like the tucked in position of the woodcrafts on the track better. The drop is not really that significant unless you're one of those people that use their hands to support their weight instead of their core. May 14, 2014
Reply to Khaled Good answer? Yes (0) No (0)
John A: Absolutely not. And they shouldn't, as that is their purpose- to lower your hands for a more aggressive riding position. If you're only looking for weight reduction but want to maintain a similar riding position as stock, you can try the clip-ons with risers. May 14, 2014
Reply to John Good answer? Yes (0) No (0)
Patt H: Depends on the bike. Woodcraft makes most of them to fit OEM style and/or some have options to raise. Clearance cab be an issue. I have them on my 08 Honda CBR, 13 Ninja 250 and 13 BMW s1000. They fit well and its easy to change the bar when it gets damaged. May 14, 2014
Reply to Patt Good answer? Yes (0) No (0)
Patrick D: I don't know. They are supposed to improve the riding position from stock, but I have not installed mine yet. May 14, 2014
Reply to Patrick Good answer? Yes (0) No (0)
A S: Oh, I have a 2002 R6. Which size would be stock for my bike? I didn't realize there were so many sizes. May 13, 2014
Reply to A Good answer? Yes (0) No (0)
A shopper asked: How much fork tube do these clamp onto? If I have 1 1/2" of fork tube sticking out ontop of my triple clamps could I mount these ontop or do I have to mount them under my triple clamps? Nov 25, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Max M: You should be fine with that amount above but be aware, you are going to have less clearance when your front forks are under load if you place them above the triple. It depends on the bike though and if the bike already has handlebars above the tree. My GS500 doesn't and my clip-ons are below the tree. Nov 25, 2013
Reply to Max Good answer? Yes (0) No (0)
Mikhail B: I don't have the exact measurements but I loosened the triple tree andlower fork clamp in order to create more space for them to clamp onto. I wouldn't recommend installing them below the triple tree as it would create an uncomfortable ride and a really bad turning circle. Nov 25, 2013
Reply to Mikhail Good answer? Yes (0) No (0)
Joseph D: You would need to mount them under the triple tree, the mounts are quite thick. I don't think an inch and a half will be enough. Nov 26, 2013
Reply to Joseph Good answer? Yes (0) No (0)
gary E: G'day, just measured mine for you, and one and half inches will be perfect. Cheers Gary Nov 25, 2013
Reply to gary Good answer? Yes (0) No (0)
DUSTIN O: They should be mounted under your triple tree. Nov 25, 2013
Reply to DUSTIN Good answer? Yes (0) No (0)
lisa m asked: hey. anyone had any luck removing the rounded end to insert bar-end mirrors? i don't want to mangle the plastic. cheers Jul 4, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Erwin M: Hi Lisa, those bar ends can be tricky to remove. If you're lucky they will come off with a simple screw driver, but if not you'll need a torque wrench for sure. It'll make quick work of the bar end and make install your mirrors a breeze, Hope this answers your question. Jul 12, 2014
Reply to Erwin Good answer? Yes (1) No (0)
Erik S: Mine popped right out... I think I just used some sort of flat edge to pry the plastic inserts out. It's basically a plastic cork. I added bar sliders to the end and discarded the original pieces you are speaking of I believe? Hope this helps.... Jul 4, 2014
Reply to Erik Good answer? Yes (1) No (0)
Andrew P: I tried with wd40 and was able to work them out ok but not cleanly Jul 4, 2014
Reply to Andrew Good answer? Yes (1) No (0)
alberto a: Yes. Just pull them out. Jul 5, 2014
Reply to alberto Good answer? Yes (0) No (0)
A shopper asked: I'm interested in there's bars. I see it says 2 piece.. Do these also have removable 12in bars? Feb 10, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Patrick D: Everything can be replaced with the Woodcraft clip ons. They sell replacement bars. I'm not sure how long they are though. Feb 10, 2014
Reply to Patrick Good answer? Yes (0) No (0)
gary E: Yes mate, the clamps are 2 piece and the bars are removable, good product use them on my race bike. Cheers Gary Feb 10, 2014
Reply to gary Good answer? Yes (0) No (0)
Henry F: Yes, comes with clip on and bar. Feb 10, 2014
Reply to Henry Good answer? Yes (0) No (0)
A shopper asked: can you take off the plastic end and put on a different bar ends without ruin the handle bars? And if you can take off the plastic end how? because my is stuck in there really good. Helps Jul 29, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
John A: I removed mine with pliers I think. I may have drilled into, then pulled them out. I used the woodcraft weighted bar ends, but I'm sure any bar end designed for the same size bar that you're using will fit just fine. Most of them use an expansion type fitting, so if you purchase a different brands bar end designed for a 33mm bar, and your bars are 33mm, they should be good to go. Jul 30, 2014
Reply to John Good answer? Yes (0) No (0)
Max M: You would need to damage them to remove them, but you should be able to get a good clamp or vice and just twist them out. Jul 29, 2014
Reply to Max Good answer? Yes (0) No (0)
A shopper asked: Hi, I have a 1985 r80rt bmw. the fork I believe is 38.5mm, but this is 38mm. Would I be able to buy this and make it work ok? Aug 4, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
David B: I think you'd need to hone them down. Not ideal. I don't think jamming them on as is would work. 38.5 is an odd diameter so you'll probably struggle to find something off the shelf. Aug 4, 2014
Reply to David Good answer? Yes (0) No (0)
A shopper asked: Hi, just wondering if the bars are all the same length? I have some already on a GSXR 1000 K8 and one is bent. So I only need to replace the bar for that left side.

Could you please let me know and if possible The total price including shipping to Sydney, Australia.

Cheers.
Aug 4, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Klint K: As long as you're not using the extra long bars, they're all the same length. Aug 5, 2014
Reply to Klint Good answer? Yes (0) No (0)
A shopper asked: Woodcraft makes these clip-ons in 39mm however I don't see that as a selectable option.

Are you able to get 39mm?

Thanks,
S
Jul 12, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Henry F: I'd check the woodcraft website to see if that size exists. Google. Aug 7, 2014
Reply to Henry Good answer? Yes (0) No (0)
A shopper asked: I want to put these on my Ninja 300. What is the difference between these and the ones with the riser? Will these be right at the top of the forks giving me a better stretch forward? Also can I put bar ends on these because I have some really nice limited edition driven bar ends I want to put on when I switch em. Thanks Dec 6, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
landon m: the bar ends should work fine. I do not know from experience but I believe the risers will make it so you can adjust your bar height even higher than possible with factory clip ons or similar ones. These will clamp on to your forks where the diameter is applicable (48 mm outer diameter forks will work with 48 mm clip-ons). You will need about 2 inches (taking a guess at the length here without actually look at mine) of length on the fork to clamp on so if you don't have that much of your fork come out beyond your triple clamp (which I doubt it but I don't know the ninjas very well) then these wont actually be at the top of the forks but close. Dec 7, 2013
Reply to landon Good answer? Yes (0) No (0)
A shopper asked: Are the bars 1 inch or 7/8? Oct 28, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Troy Z: The bar portion is 7/8" in diameter, same as the stockers. Oct 28, 2013
Reply to Troy Good answer? Yes (0) No (0)
A shopper asked: What degree drop are the Woodcraft clip ons for Triumph Daytona 675. 50 mm ? Sep 2, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: The angle of drop on the Woodcraft clip on handle bars for the Triumph 675 is 7 degrees. Sep 5, 2012
Reply to RevZilla Good answer? Yes (0) No (0)
A shopper asked: hey... i have 38mm forks, but you sell only 37mm clip ons. have never installed these bars before so wanted to know if they will fit? i know it is a 3mm circumference difference.... only other option you have is 41's and those are too big. would appreciate your advice/knowledge! Jun 25, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Silver / 29MM 516775 12-0129 Available: Usually ships in 1-2 days
Silver / 30MM 516776 12-0130 Available: Usually ships in 1-2 days
Silver / 31MM 516777 12-0131 In Stock: Ships within 24 hours
Silver / 33MM 516779 12-0133 In Stock: Ships within 24 hours
Silver / 34MM 516780 12-0134 In Stock: Ships within 24 hours
Silver / 35MM 516781 12-0135 Available: Usually ships in 1-2 days
Silver / 36MM 516782 12-0136 In Stock: Ships within 24 hours
Silver / 37MM 516783 12-0137 In Stock: Ships within 24 hours
Silver / 38MM 516784 12-0138 Available: Usually ships in 1-2 days
Silver / 41MM 516785 12-0141 In Stock: Ships within 24 hours
Silver / 43MM 516787 12-0143 In Stock: Ships within 24 hours
Silver / 45MM 516788 12-0145 In Stock: Ships within 24 hours
Silver / 46MM 516789 12-0146 Available: Usually ships in 1-2 days
Silver / 48MM 516790 12-0148 Available: Usually ships in 1-2 days
Silver / 50MM 516791 12-0150 In Stock: Ships within 24 hours
Silver / 51MM 516792 12-0151 In Stock: Ships within 24 hours
Silver / 52MM 516793 12-0152 In Stock: Ships within 24 hours
Silver / 53MM 516794 12-0153 In Stock: Ships within 24 hours
Silver / 54MM 516795 12-0154 In Stock: Ships within 24 hours
Silver / 55MM 773752 12-0155 In Stock: Ships within 24 hours