Log In / Register
Cart (0) Checkout
Tour Master Synergy 2.0 Vest Liner
Zoom
  • With Collar
  • With Collar
  • Without Collar

Please select a Type and Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Type:

Select Size:

Size Chart
Select qty:
MSRP
$174.99 - $179.99
Your Savings (10%):
$17.50
Your Price
$157.49
Please select a Type and Size to view availability.

Tour Master Synergy 2.0 Vest Liner

The Synergy vest includes a power lead wiring harness, temperature control unit and a thigh-mounted leg band to attach the temperature control unit.

Features:

  • Designed to operate in all weather conditions from a vehicle’s 12-volt electrical system
  • Warmth without bulk or discomfort, making for a safer, more enjoyable ride
  • Lightweight, flexible steel fiber heating elements provide safe, even warmth
  • Expanding side panels help fine tune the fit and increase comfort
  • Water-resistant, single or dual rheostat available (dual rheostat included with jackets and vests)

Vest with Collar:

Temp Setting Temp (F) Draw (W) Draw (A)
Level 1 109.3 51.6 4.3
Level 2 117.4 51.6 4.3
Level 3 125.6 51.6 4.3
Level 4 133.7 51.6 4.3
Level 5 141.8 51.6 4.3

Vest Without Collar:

Temp Setting Temp (F) Draw (W) Draw (A)
Level 1 109.3 48 4
Level 2 117.4 48 4
Level 3 125.6 48 4
Level 4 133.7 48 4
Level 5 141.8 48 4

Write a Product Review for a chance to win our monthly $100 giveaways.
Tour Master Synergy 2.0 Vest Liner 4.6 5 5 5
Well-built, works great, good price Looks well-built. Fit is excellent using the fit chart. It's low-profile so doesn't add much bulk when worn over a base layer. Price is good compared to other similar products, and it comes with all necessary parts including dual control. My first heated clothing, bought for fall riding, it's been great. Heats up immediately and so far the low setting has been plenty. So far no negatives. October 20, 2014
Great vest, happy with the purchase I am very happy with the purchase. I am 6 ft and 165 lbs and the medium fits me great, so these run slightly large. The included controller is great and you can't beat the price. The vest gets very warm, I have not actually had to use it higher than the 2nd setting. Recommended. July 26, 2014
Excellent product Debated buying a heated vest for a while. Now I wonder how I rode without one. Well made and price is right, even comes with a dual zone thermostat so you can hook up gloves, socks exc. April 28, 2014
Extend your riding season I've had this vest for three months and overall, I am very pleased. You simply cannot beat the price. I have never needed more heat than level two of five levels. The coldest I have experienced with this product is forty-two degrees with a windshield and any colder I would want heated sleeves. The fit seems slightly large for me but I might be that my belly is bigger than my chest. I'm old ya know... April 7, 2014
Very effective, super cozy! This is something you'll want to fit quite snug, so don't order too big. Wiring into my Denali PowerHub was easy, and the instructions are straightforward. The supplied controller can support two items in case you've got another Tour Master heated item. The vest fits well (I have a 46" chest and ordered a Large which was perfect). Heat comes in very quickly, and it's VERY warm! I rode for 2 hours in 43F weather and only needed setting 2 of 5. Here's the best bit - with a nice warm core your body will happily send warm blood to your hands; no heated gloves or grips required. At the end of my ride my hands were still toasty and warm even without heated grips or gloves, the last time I rode in the same temperature they were like ice. Very happy with this! January 18, 2014
1-5 of 5
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Tour Master Synergy 2.0 Vest Liner? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Tour Master Synergy 2.0 Vest Liner
Already Asked: 12 Questions, 52 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
BENJAMIN C: Need to update my children's riding gear. Didn't see the ventura small vest but the tourmaster jacket they have (Jett 3) has been great. Dec 14, 2014
Edward Bradish c/o Montana S: Price included temp controller. Dec 13, 2014
Jeff j: My wife and I do a lot of riding and in Pa its not always warm enough for just leathers, and to extend our riding enjoyment I done a lot of research on heated clothing, For the quality and price the Tour Master Synergy 2.0 vest is by far my choice. This is the perfect Christmas present for the wife. Dec 4, 2014
Jason K: Best price on a heated vest from a good company. Dec 3, 2014
Anthony C: Old vest is 14 years old and worn out. Nov 13, 2014
Alex V: good to have for cold weather riding. Oct 23, 2014
Robert S: I need a heated vest with controller I can readily adjust going up and down those eastern alpine passes day-in and day-out on a two-week MC tour riding BMWs. Aug 19, 2014
dan m: ease of use and price plus quality Aug 2, 2014
Leo S: so warm I hardly turn it on - coldest ride so far 17 deg May 6, 2014
Darren L: I figured this would be good insurance to keep in my tour pack for when the temp drops when I'm far from home on a long ride. Jan 9, 2014
Dennis H: Highly recommended by Web Bike World, have been happy with other Tour Master products Jan 6, 2014
Derek M: Web-bike world gives Tour Master Synergy 2 a great review Jan 1, 2014
A shopper asked: Does the vest include extended cables to connect with gloves? Dec 17, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Peter C: No it doesn't, It also doesn't include cables to attach pants, heated insoles, or earmuffs, why would it?

If you think about it for just a moment, why would they give you cables for something you may never own?

Another way to look at this question is, if you buy gloves do you think (or does the description say) they come with the cables, so you would not require them to come for free with a vest, right?

I will say this vest works fantastic, and the cables that came with my First Gear Carbon Gloves works great with my gloves.

I can also add that although there is another wire exiting this vest for a second set of heat something, I do not connect my gloves to my vest. I connect my gloves directly to my Gebring controller as there are many times I need my gloves on but not my vest (say 40 degrees down to 30 degrees. At 30 degrees down to 15 degrees, the vest and gloves are handy to have on, but I may have my gloves set to high heat and the vest to mid heat in the 20's.

I connect my gebring heated insoles to the second connector on the vest as I find those two at the same heat level work well. The insoles come with their own cable, BECAUSE you may have insoles connected to the controller without any other heated gear - Say you wear a warm coat and do not need a vest, and you have heated grips so don't require heated gloves....but your toes get cold because you are riding with sneakers because you are a bit compromised in the head, you'd need wire from the controller to the insoles. If the extended cable came with a vest, you'd be out of luck with your insoles, huh?

A little thought goes a long way huh? Or in the case of someone referred to as Sarcasmo in the bike club he started, a little thought goes perhaps to far.

At any rate, have a nice day!
Dec 17, 2014
Reply to Peter Good answer? Yes (0) No (0)
Randolph H: Sorry, I didn't get the heated gloves. The controller has an extra lead on it that is probably for that, maybe for heated lowers!
I've been riding a good bit this fall, temps in the high 30's here in Kentucky. High humidity also. The vest works awesome. Had it on setting 2 once. It was too hot! Highly recommend the vest.
Dec 17, 2014
Reply to Randolph Good answer? Yes (0) No (0)
Jeffrey D: No, there is a connector at the waist that you can plug another accessory into. But it is only a couple of inches long. I suspect that gloves themselves would come with long cables for threading through the sleeves. Dec 17, 2014
Reply to Jeffrey Good answer? Yes (0) No (0)
Robert W: The vest did not include extender cables for gloves. However, the controller has two (2) outlets and two rheostats. So it can be used for both the vest and something else (pants, gloves). Dec 18, 2014
Reply to Robert Good answer? Yes (0) No (0)
Rob H: Hi Mate
Extended cable needs to be purchased seperately as is not included with vest.
Not sure if cable is included when you purchase gloves?
Dec 17, 2014
Reply to Rob Good answer? Yes (0) No (0)
Alex P: It does not include additional cables for accessories, although there is a plugin and separate controller for it. Dec 17, 2014
Reply to Alex Good answer? Yes (0) No (0)
A shopper asked: Which plug comes with the vests, Std 12v or the BMW plugs? Nov 17, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
James R: Neither. Synergy gear has an RCA-like male and female plug, which conveniently pull apart when you forget to unplug and get off the bike. The female plug is fused and connects directly to the battery. There is also an adapter available which goes from a standard SAE plug to the Tourmaster plug. That way, if you already have a battery tender lead to your battery, you can use the adapter and use it to connect to the Synergy system. Nov 17, 2014
Reply to James Good answer? Yes (0) No (0)
Alan S: The vest comes with a power harness that attaches directly to your battery. The harness attaches to the vest via supplied (coax) connectors. It's very easy to set up. If you want to use a BMW outlet on your bike you can get an adapter (vest coax connector to BMW plug). I should mention that the folks at Revzilla are great at answering this type of question and sorting out any issues for you. Great vest by the way... Nov 18, 2014
Reply to Alan Good answer? Yes (0) No (0)
Ron S: I am unfamiliar with the BMW plug. The plug connections coming off the vest look very similar to an RCA audio plug connection (std 12v). However the vest comes with a harness that connects battery and a dual controller, all with color coded plugs. Nov 18, 2014
Reply to Ron Good answer? Yes (0) No (0)
TOM M: I AM NOT SURE WHAT A BMW PLUG IS , BUT IT DID HAVE A SINGLE POLE MALE CONNECTOR THAT ATTACHED TO A FEMALE CONNECTOR FROM THE BATTERY.... Nov 18, 2014
Reply to TOM Good answer? Yes (0) No (0)
W D S: A harness that wires directly to the battery comes with this vest, and plugs to the controller that plugs to the vest. Nov 17, 2014
Reply to W D Good answer? Yes (0) No (0)
Kevin R asked: Will this vest work with the girbing heat controller i have installed in my bike? May 5, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Darren L: Ii had the same question before I bought mine so I called tourmaster directly... They advised no it will not..... But when you buy the best it comes with their controller anyway.....so it didn't matter anyway..... Hope this helps... May 5, 2014
Reply to Darren Good answer? Yes (0) No (0)
Guy S: I can't guarantee it-but, they look like the same fittings. I have heard that tourmaster heated clothing is made by Gerbings, or vise versa. Good luck-and I really like my vest... May 5, 2014
Reply to Guy Good answer? Yes (0) No (0)
Michael K: This vest has the thermostat built into it and only requires a battery connection to the bikes battery . May 5, 2014
Reply to Michael Good answer? Yes (0) No (0)
Rob H: Yes Mate Tour Master vest will work with Gerbing & First gear controllers
Vest is bloody awesome
May 6, 2014
Reply to Rob Good answer? Yes (0) No (0)
Peter C: I use the Gebring dual controller and it works fine with this vest. Dec 17, 2014
Reply to Peter Good answer? Yes (0) No (0)
Dustin M asked: Does this vest use the little universal coax cable to plug into the electrical system, or is it a cable specific to TourMaster? Dec 18, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
CLIFF G: Hi Dustin, it uses a TourMaster specific controller. It comes with a dual controller, but a single controller is available as an accessory. The plugs are coax with the female end coming from the battery and one plug from the controller plugs into that, and a male end comes from the vest where the other plug from the controller plugs into. Dec 18, 2013
Reply to CLIFF Good answer? Yes (2) No (0)
Dustin M: Thanks Cliff! One question - does the single controller draw less power since it's for only one piece of gear (I assume), or does the dual controller draw the same amount as the single if only one of the controllers are used?

I'd be using this on a Honda PCX150 scooter, so I don't know if the battery is as powerful or any different from one in a motorcycle, but it is a 12V, 6A battery. Dec 18, 2013
CLIFF G: Hi Dustin, the controller is a rheostat (dial adjustment) that controls the amount of heat you want. If you crank up the heat you'll draw more current. If you have 2 or more pieces of apparel that you want to heat up, that means more current draw. By the way, I have found that I only need the vest on the lowest setting under a jacket with a quilted liner down to about 40 deg F, but I don't know how much current it draws at that setting. Your battery is probably fine, but I think the likelihood of draining the battery has more to do with whether the charging system of your scooter can keep up. I'm guessing that it would be fine, but not 100% sure. Dec 18, 2013
Reply to CLIFF Good answer? Yes (1) No (0)
Dustin M: Really appreciate the advice Cliff! I'm not technically inclined enough to know what the charging system is like, but I can definitely hook up the cables and run them to the gear. Thought I might also install a voltmeter so I can keep tabs on the battery while riding. I just got a TourMaster jacket for colder weather, but have no plans on riding in sub 45-50º weather... just figured a vest would be nice to have underneath and plugged in if needed. Been under 30º the last few days in NJ and I'm cold in my car! Dec 18, 2013
Guy S: Hey Dustin-
The vest comes with an adaptor that can connect directly to your battery. I have a BMW with CANBUS. I had to buy an adaptor so that I could plug right into the bike. Get the vest...it works really well. wiring it up is super easy as well.
Good luck-
Dec 23, 2013
Reply to Guy Good answer? Yes (1) No (0)
Dustin M: Thanks Guy, appreciate the hints advice! Jan 1, 2014
Bob E: It uses a universal coax cable. Dec 18, 2013
Reply to Bob Good answer? Yes (1) No (0)
Dustin M: Excellent, thanks for the info! Dec 18, 2013
Dustin M: Excellent, thanks for the info! Dec 18, 2013
Reply to Dustin Good answer? Yes (0) No (0)
A shopper asked: Is there a battery I can use with the first gear vest? I would like to wear it during the winter when i am not tethered to the bike. I know gerbling has a battery, can i use that one? Jan 21, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
KEVIN C: This is a TourMaster vest, not FirstGear.

Tourmaster does not offer a battery (it's pretty easy to check by looking at their website). The vest is rated at 160W, which means that even if you carried around a battery the size of the one that is inside the bike it would only last for a little over an hour on full power - and that's a heavy battery!
Jan 21, 2014
Reply to KEVIN Good answer? Yes (0) No (0)
Guy S: I am unaware of a portable battery that can connected to this vest. I believe there are ski/snowmobile vests that use onboard batteries. But, I haven't seen an attachment to convert this vest. Jan 21, 2014
Reply to Guy Good answer? Yes (0) No (0)
Darren L: I believe you can....I read somewhere that a guy has done just that for hunting but I would call the company directly and ask just to be on the safe side..... Jan 21, 2014
Reply to Darren Good answer? Yes (0) No (0)
Rob H: I only use the vest connected to the bike however i am fairly certain that it will work with the Gerbing battery pack. Jan 21, 2014
Reply to Rob Good answer? Yes (0) No (0)
George L asked: Does the vest include extended cables to connect with gloves? Dec 17, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Radek A: No it does not. It does have extenders for pants, however. Dec 17, 2014
Reply to Radek Good answer? Yes (1) No (0)
Jason K: No extension cables are included with the vest. The cables the vest comes with give you enough room to get off your bike and disconnect (vest only). All the connection points are included with the vest and the dual controller is great to have at this price point. Unless the gloves come with extensions this is something you will need purchase. Dec 17, 2014
Reply to Jason Good answer? Yes (0) No (0)
Jeffrey G: It has two connections. One for the vest to bike and one for gloves, pants etc. both of which have a separate temp controller. I like the vest. Dec 17, 2014
Reply to Jeffrey Good answer? Yes (0) No (0)
George L: But you still need the extensions to reach to the gloves right? Should I buy extra cables as well? Dec 17, 2014
A shopper asked: I have a BMW R1200RT and will need a plug, do you have those too? Is it better to use the plug or attach to the battery? If you use the plug does it detach if you forget to unplug when getting off the bike? Nov 29, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
A s: I don't have a BMW but I would think twice before I connected an accessory to the bikes wiring system. It is my understanding that the newer BMWs have a CANBUS system that does not take well to random new circuits. Look into that. I just wired my vest directly to the battery as per the instructions. Heated gear is a high amperage draw item and you don't want to overtax an existing circuit. Depending on the angle of the pull the plugs will pull out before the wire breaks but they are pretty stiff to pull apart. Good Luck By the way the vest works great and it comes with all needed to do a direct to battery hookup Nov 29, 2014
Reply to A Good answer? Yes (0) No (0)
Darren L: Mine is a 2013 RT and I plug mine directly into to the factory power outlet with no issues. The factory plugs are rated at 10A which is more then enough to power the vest. Just buy the plug adapter and you good to go.... Nov 29, 2014
Reply to Darren Good answer? Yes (0) No (0)
Jason K: I purchased the "Powerlet To Coax Female 10" for my BMW and it works great. The plug can detach from the vest to the controller, or from the controller to the BMW plug. I feel it being yanked before it disconnects. Dec 17, 2014
Reply to Jason Good answer? Yes (0) No (0)
A shopper asked: i see similar questions below but looks like different answers so here goes again. the plug looks compatible with gerbing plugs but not sure. i have a few gerbing items but could use the vest and would want to link it with the gloves if necessary, etc. Has anybody actually contacted the Tourmaster to garbing accessories? thanks Nov 14, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Peter C: I have the tourmaster vest, gerbing controller and gerbing insoles, with first gear carbon heated gloves, they all work great together. I'll be using them all headjng out at 6am 24 degrees f from albany ny to revzilla in the morning. Nov 14, 2014
Reply to Peter Good answer? Yes (0) No (0)
Rob H: Hi Mate
The tour master vest will be compatible with your
Gerbing heated gea
FYI
I have had the TM Synergy 2 vest for a couple of winters now & I can highly recommend
Regards from down under
Nov 15, 2014
Reply to Rob Good answer? Yes (0) No (0)
Darren L: Yes I was advised by tourmaster not to use their plugs with gerbing gear and visa versa..... Not sure why but that's what I was told Nov 29, 2014
Reply to Darren Good answer? Yes (0) No (0)
A shopper asked: How many heating panels and wher are they located in the vest? What is the heating element made of? Thanks Aug 9, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Rob H: I have the vest with no collar, this has 3 heating panels.
One each side of the front , either side of the zipper & one on the back of the vest.
The heating elements are steel fibre, they are quite flexible & do not restrict in anyway.
You get the majority of the heat on the front
You can feel heat between your shoulders but not as much as the front.
I am in Australia & where I live temps get down to 4 deg Celsius, I usually have it on the second hest setting & I am toasty warm ( has 5 heat settings).
Great bit of kit I can highly recommend.
Aug 11, 2013
Reply to Rob Good answer? Yes (0) No (0)
DAVID U: Not sure of the number of heat elements, but it's a great vest keeps me nice in the cold, and I shopped around and asked questions and REVZILLA is the best our there I wouldn't go any where else to shop, my back tire, glove liners,& heated vest all top notch from Revzilla! Aug 11, 2013
Reply to DAVID Good answer? Yes (0) No (0)
Derek M: The vest has heated elements that run up and down the front and back of the vest. It does have panels as such. 2.0 has flexible steel fiber elements. Aug 9, 2013
Reply to Derek Good answer? Yes (0) No (0)
A S asked: What plug comes with the vest BMW or 12V std? Nov 17, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Darren L: Neither... You will have to buy which ever one you want... Comes with their harness with coax connectors... Nov 29, 2014
Reply to Darren Good answer? Yes (0) No (0)
Jason K: They call it a COAX plug. I purchased the "Powerlet To Coax Female 10" for my BMW and it works great. Dec 17, 2014
Reply to Jason Good answer? Yes (0) No (0)
A shopper asked: Will the tour master synergy gloves connect to the vest? Nov 7, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: The Synergy 2.0 gloves will work with the Synergy 2.0 vest or jacket liners. To connect the vest to the gloves, you will need a V-Split electrical adaptor, which is included with the synergy gloves. The set up would then go as follows (from the Tour Master Instruction manual):

Glove Connection:

Connect the red connector (male) on the controller to the red connector (female) on the power lead harness.
Using the supplied V-Split adaptor, route the black (male) connection wire up the left side of the vest/jacket and the gray connection wire through the right side
Connect the right hand glove's gray connector (female) to the V-Split connector cable's gray connector (male)
Connect the left hand glove's black connector (female) to the V-Split connector cable's black connector (male)
Connect the V-Split adaptor's black connector (male) to the dual controller's gray connector (female)
Prior to use, double check that the wiring and temperature controller do not hinder your ability to safely control the vehicle.
Nov 8, 2012
Reply to RevZilla Good answer? Yes (0) No (0)

Tour Master Synergy Men's Jacket and Vest Liner Sizing:

Size Chest (in) Abdomen (in)  Sleeve (in)
2XS 36 38 25
XS 38 40 25.5
SM 40 42 26
MD 42 44 26.5
LG 44 46 27
XL 46 50 27.5
2XL 50 53 27.5
3XL 53 56 28
4XL 56 59 28

Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

Click here to see the full Tour Master Size Chart
Product Style RevZilla Item # Manufacturer Product # Availability
With Collar / XS 796303 8764-0205-03 In Stock: Ships next business day
With Collar / SM 796304 8764-0205-04 In Stock: Ships next business day
With Collar / MD 796305 8764-0205-05 In Stock: Ships next business day
With Collar / LG 796306 8764-0205-06 In Stock: Ships next business day
With Collar / XL 796307 8764-0205-07 In Stock: Ships next business day
With Collar / 2XL 796308 8764-0205-08 In Stock: Ships next business day
With Collar / 3XL 796309 8764-0205-09 In Stock: Ships next business day
With Collar / 4XL 796310 8764-0205-10 In Stock: Ships next business day
Without Collar / XS 796295 8764-0305-03 In Stock: Ships next business day
Without Collar / SM 796296 8764-0305-04 In Stock: Ships next business day
Without Collar / MD 796297 8764-0305-05 In Stock: Ships next business day
Without Collar / LG 796298 8764-0305-06 In Stock: Ships next business day
Without Collar / XL 796299 8764-0305-07 In Stock: Ships next business day
Without Collar / 2XL 796300 8764-0305-08 In Stock: Ships next business day
Without Collar / 3XL 796301 8764-0305-09 In Stock: Ships next business day
Without Collar / 4XL 796302 8764-0305-10 In Stock: Ships next business day