Log In / Register
Cart (0) Checkout
Saddlemen SaddleGel Pads
Zoom
  • Saddlemen SaddleGel Pads - MD
  • Saddlemen SaddleGel Pads - LG

Please select a Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Size:

Select qty:
Your Price
$44.00
Please select a Size to view availability.

Video Review

Saddlemen SaddleGel Pads Videos

Saddlemen Saddle Gel Pads

Saddlemen Saddle Gel Pads can make any motorcycle seat into a SaddleGel seat when installed. These raw gel pads install quickly under the cover of your existing seat saving the cost of buying a new seat or increasing the height of an existing seat with a top pad. The amazing SaddleGel material can be cut or shaped to your individual needs. The pad can be inlaid into the existing foam (maintaining original seat height) or simply placed under the original covers of most seats. 

MD - 9" LONG X 7½" REAR WIDTH X 5½" FRONT WIDTH x 5/8'' THICK
LG - 10" LONG X 12½" REAR WIDTH X 6" FRONT WIDTH x 5/8'' THICK
XL - 12" LONG X 15" REAR WIDTH X 8" FRONT WIDTH x 5/8'' THICK

See Fitment Chart for additional fit information.

Note: LG and XL feature the same shape.

Resources:

View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

Write a Product Review for a chance to win our monthly $100 giveaways.
Saddlemen SaddleGel Pads 4.3 5 7 7
Great improvement I had a custom shop install this. They carved out foam to place under the bikes existing foam seat rather than on top.. I thought that was brilliant. Vastly improves the cushion effect, while still has firmness for bike feedback on sportier rides. 2014 Suzuki Vstrom 1000, factory seat. August 24, 2015
Saddle Gel Pad Before you start your project: If you've never done upholstery before you may end up needing two of these like I did. Basically you have a great idea of cutting into your seats foam and putting this in place of it. Well it's not that easy haha... When all was said and done I cut out the entire middle of my seat and needed ***two gel pads*** to make the seat look good. Install takes about half an hour first try. Once you realize you need to re-do it it takes another half an hour. So an hour. Very simple stuff I've had it on my seat for a while now and it holds form and doesn't move around. Rear seat 2008 zx6r Again maybe I'm r*t*r*e* and everyone else can make those perfect cuts and trims to make this fit nicely without using two, but eh I like it like this. August 17, 2015
Worse than stock! I bought this because my stock seat on my 2008 cbr600rr was hurting my butt after about an hour of riding. Now that I have this thing installed my butt hurts after just 20-30 minutes of riding... I think i'm officially done with gel seats.... Here's a video I made on my install process in case you are curious. June 13, 2015
Great I got the Gel Insert and I cut a place for it. Worked like a champ. March 9, 2015
For my Bolt Purchased it for my Yamaha Bolt. After about 100 miles or so, my back would really start to hurt. My legs would ache and I would have to pull over for a bit to continue. Installed this with the stock seat and much better. Lets you get more miles on the road and is a great alternative to purchasing a new (and expensive) seat. December 18, 2014
Your balls will thank you Dear Owner, Please put something between me and this steel seat pan and this 35 year old cushion. I plead to your sense of humanity that you protect me and give me comfort from all this vibration from your 1979 Shovelhead motor. Why not try Saddlemen SaddleGel Pads? Saddlemen SaddleGel Pads provides great support from vibration and monkey butt. It's super easy to install, just unstaple your upholstery, peel and stick gel on top of cushion, then stable upholstery back to seat pan. Easy! Sincerely, Your Nutts --------------------------------------------------------------------- Dear Harry, Thanks!! Sincerely, Your Pal November 10, 2014
way cheaper than buying a new seat. My GF complains about the pillion seats lack of comfort on my SKrr. (I know, I know, "its a track bike", blah, blah)..but I cut a rectangle in the foam of the pillion seat and inserted this gel and viola...a super comfortable seat for her when she wants to join me on my torture device. August 11, 2014
1-7 of 7
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Saddlemen SaddleGel Pads? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Saddlemen SaddleGel Pads
Already Asked: 6 Questions, 10 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Kevin W: Had this placed in the seat of my Multistrada. Excellent fit and adds just the right cushion to stock seat. Jan 6, 2015
Paul H asked: What gel pack/padding do you recommend for the passenger seat of a Burgman 650? Oct 28, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Murray T: Just choose the size that fits the actual seating area. Better too big than too small you can always cut to shape.
I got an old pair of cotton trousers that I didn't wear anymore and cut a section of one leg off that was about the same size as the pad. I then sewed 2 elastic straps from one side to the other at each end. I inserted the pad then sewed up the ends. the pad now sits on the seat with the straps around the seat to hold it in place. this cannot be seen because I also have a sheepskin seat cover so the pad sits under it.
The pad works well and doesn't move at all.
hope this helps.
Oct 28, 2014
Reply to Murray Good answer? Yes (0) No (0)
Matthew W: For my Suzuki Gladius, I bought the green pad, size XL. I brought it to an upholsterer and had him insert it under the existing seat vinyl. It makes a decent difference. If you buy a larger pad than the seat, the pad can always be cut to fit. That is better than buying too small of a pad and having an awkward ridge in the seat where the pad stops. Oct 29, 2014
Reply to Matthew Good answer? Yes (0) No (0)
Michael C: If looking for raw gel….Measure the area to be fitted. All seats are different in their dimensions. The gel can be trimmed to fit that area. Take the seat to a car upholstery shop for some advice and ask. They can be very helpful and some are very happy to help with the work usually pretty reasonable. Oct 28, 2014
Reply to Michael Good answer? Yes (0) No (0)
Steven K: Buy a custom seat or a air hawk. Don't do the gel. Oct 28, 2014
Reply to Steven Good answer? Yes (0) No (0)
CHIN TIONG L asked: What size should I take to fit on Fz8 rider seat? Feb 22, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Murray T: sorry mate , as I don't know how big your seat is I can't answer the question. I would buy the larger one and if too big you can always cut it down. that would be better than having one too small. I bought the gel pad as it was, that is without the cover. I shaped it to my seat then made my own cover out of the leg off an old pair of trousers, and I sewed some elastic to it.
Good luck !
Feb 23, 2015
Reply to Murray Good answer? Yes (0) No (0)
Matthew W: I'm not sure on that, but if in doubt, I would buy the biggest size. It can be Trimmed to fit. Feb 23, 2015
Reply to Matthew Good answer? Yes (0) No (0)
A shopper asked: I recently bought the raw gel pad. Can I buy just a cover for it? Jul 14, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Sarosh P: Yes I guess you can, but I doubt it will fit securely...
I cut into the seat base and got it installed (as per this video I found , http://youtu.be/pvA4Hnt9qUM and it's been beautiful so far!
Doesnt move around or anything, and long rides have become a breeze now
Jul 14, 2014
Reply to Sarosh Good answer? Yes (0) No (0)
Matthew W: I didn't get or need a cover with mine. I had an upholstery shop install it between my seat pan and the existing vinyl Jul 14, 2014
Reply to Matthew Good answer? Yes (0) No (0)
A shopper asked: Do you have a video that shows how to install this product? Mar 22, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
B M: If this is the gel that goes under your orig. seat cover.. its simple. remove seat remove staples peel cover back and insert pad. recover and re install staples. you will have to work at getting it stretched tight but it will go... Apr 22, 2015
Reply to B Good answer? Yes (0) No (0)
A shopper asked: What´s the weight of the large pad ? Nov 20, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
MD 623110 9425 In Stock: Ships within 24 hours
LG 622418 9422 In Stock: Ships within 24 hours
XL 622662 10034 In Stock: Ships within 24 hours