Log In / Register
Cart (0) Checkout
Pro Grip 842 Gel Duo Density Cruiser Grip
Zoom

Please select a Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Size:

Select qty:
MSRP
$15.49
Your Savings (10%):
$1.55
Your Price
$13.94
Please select a Size to view availability.

View more like this:

Pro Grip 842 Gel Duo Density Cruiser Grip

  • RVGS: Reduced Vibration Gel System - all gel on the outside
  • The softness of Gel and the strength of duo density
  • Grey base against the bar (37 shore)
  • Exterior in gel for soft, ergonomic fit (15 shore) - made from the same high-tech rubber compounds used in Formula One racing cars
  • Super soft and super durable with great adhesion
  • Patented process co-molds the RVGS in the grip
  • Gel molds to the hand as pressure is applied
  • Approximately 4 7/8" long
View Fitment Notes & Exceptions

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

Write a Product Review for a chance to win our monthly $100 giveaways.
Pro Grip 842 Gel Duo Density Cruiser Grip 4.3 5 9 9
Great replacement grip I put these on my 1980 Yamaha Midnight Special when I needed to remove the old ones to install grip heaters. They went on well with a bit of dish soap and were locked in place after about 24 hours. They feel groovy and really reduce the vibration in the handlebars. Like most of the softer gel grips, I don't expect they'll last more than a few years, but I'll gladly put on another set at that time. February 11, 2014
Good product, best price You can look for a better grip, but for this price this is a great item. Grips well, and the vibe is well reduced. January 2, 2014
Eases hand buzz a bit. Not a cure-all but better. Got this dual density hand grip to reduce a buzzy hand. I have a VFR800 with bar ends, so had to trim the ends off these grips to fit. Installation was easy with dishwashing soap solution as lubricant. Have to leave overnight to dry or else still moves if you try to use right away. Good point with that is that you can make adjustment before leaving it overnight to dry. Performance wise, the grip is has a nice feel to it and the buzzy feeling I get in my hand is reduced. It has not completely gone away, but is noticeably improved that i consider this change a success. May 27, 2013
Better than stock Well while these grips are better than stock grips i really cant say much more im sure there are better May 20, 2013
Overall, better than what I expected especially being installed on a sportsbike. Thus far after some long rides, "dead hand" has been eliminated. March 20, 2013
Comfortable & Vibration Absorption Very comfortable grips and they do help with vibration absorption. Soft and grippy with bare hands or gloves. I hope they keep their "gel" feel on the outside for a long time, but only time will tell. If you want comfortable grips that help with vibration absorption, I would definitely recommend these. January 28, 2013
Gel Grips gggggrippy! Put these over existing scooter grips by cutting ends off to allow bar ends to fit. Feel and look nice. Obviously larger diameter with both grips but feels beefier while softer. Very nice... It minimized dead hand. Hope they hold up. I think they will.... December 26, 2011
Good value These are a great value, but not the best grips out there. I wanted some low-buck heated grips for my Harley, so I purchased these Pro Grips and the Symtec foil heating element kit. This combination works great, and is budget-friendly. The rubber is very grippy, but I don't expect to get more than one or two seasons out of them. November 5, 2011
2 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Pro Grip 842 Gel Duo Density Cruiser Grip? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Pro Grip 842 Gel Duo Density Cruiser Grip
Sort by:
No questions have been asked about this item. Be the first!
Product Style RevZilla SKU ID Manufacturer Product # Availability
7/8" 712688 842GYBK-78 In Stock: Ships within 24 hours
1" 712819 842GYBK-1 In Stock: Ships within 24 hours