Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Please select a Color and Size to view availability.
Drop us your email and we'll let you know when it's in.
Started with a low price at Revzilla. Product is built very solidly and fits perfectly on my Streetglide lowers. Great product.
December 31, 2012
It fits very well and seems to be of good quality. Only dissapointment is that no choice on color...I wanted a silver one to match the crash bar, but there is nowhere that I can find a one.
February 22, 2011
Close to expectations
I received these brackets in short time as always from RevZ but found that they were a little off in their workmanship. I expected the clamp pieces to align perfectly. Apparently the connecting screws holes are either drilled prior to cutting the circle in half which misaligns them due to the kerf of the blade, or the two halves are assembled from mix and match stock which allows for significant deviation. The misalignment is side to side and not spacing between the pieces. I found the finish to be first rate with obvious thick chrome plating. The mount plate allows for eight possible pin locked positions making them near perfect overall. I just wish the two halves fit together more closely. (yes, I have the proper size for the bar on which they are mounted).
December 4, 2010
Have a functionality, fit, or otherwise product-specific question about the PIAA L-Bracket Bar Clamp? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.
Lee H:The brackets come with three "nylon" bushings for 7/8", 1" and 1 1/8" diameters. Mine fit fine on 1" bars but I'm sure I could remove some of the 1" bushing or use a dremmel type tool to enlarge the ID and make them work. Another option might be to wrap elect. tape and build up your bar to just over 1 1/8" dia. (29mm). Doubt they are going to just bolt right up but I know of nothing available that is made for a 26.9mm bar. LeeAug 22, 2013
John H:Found a conversion website online. 26.9mm = 1 1/16 inches. Piaa does show a 7/8- 1 1/4 in bracket available. Or you could get the 1 1/14 in bracket and wrap the bar with something first to increase the od of your bar. Hope this helps.Aug 25, 2013