Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Drop us your email and we'll let you know when it's in.
Givi PL3104 Side Case Racks Suzuki Burgman 650 2013-2014
Case Holder installation.
I had been searching for GIVI Panniers with case holders for my 2007 Burgman with no success.
The GIVI PL3104 Tubular Side case Racks were ideal BUT are manufactured only for 2013 / 14 Burgmans'.
The problem being the securing points for attachment to the frame. With an engineer mate and AU$25 we were able to attach the case holder without and structual change and utilising all supplied components and an additional bolt with metal sleeve and flat metal plate about 2 inch X 3 inch with drilled hole at each end.
The Plate was attached on the right side at the muffler bracket (page 6/7 D). The support arm attached to the forward hole on the bracket. (Don't tighten until you have the support arm in place).
The bolt (high tensile 3 inch) and the metal sleeve were used to secure the left side support arm to the supplied right angle bracket. (page 5/6 D). The metal sleeve ensured the measurement between the bracket and support arm (2 1/4 inches approx) was not reduced by the tension on the bolt.
The rear bridge may need some minor engineering depending on the passenger back rest (if fitted). It may be necessary to reduce the length of the forward bolt guide hole and seat support frame to align the rear bridge and the forward bolt guide. Then tighten all bolts.
That's all but you mate will require some practical skill.
August 11, 2014
Have a functionality, fit, or otherwise product-specific question about the Givi PL3104 Side Case Racks Suzuki Burgman 650 2013-2014? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.