Log In / Register
0 Checkout
Gerbing 12V Hybrid Heated Insoles
  • Gerbing 12V Hybrid Heated Insoles
  • Gerbing 12V Hybrid Heated Insoles
  • Gerbing 12V Hybrid Heated Insoles
  • Gerbing 12V Hybrid Heated Insoles

Please select a Size to check availability, or to add this item to your Shopping Cart or Wish List.

Select Size:

Size Chart
Savings (30%):

Select qty:

Please select a Size to view availability.
Add to Wish List

Video Reviews (2)

Gerbing 12V Hybrid Heated Insoles Videos

Gerbing 12V Hybrid Heated Insoles

We've all had cold feet sometime in our lives. We're talking REAL cold. Not just wedding-day jitters. Cold, stiff, tender feet can turn any ride into a miserable one. But Gerbing's coreheat12 Hybrid Heated Insoles are designed to deliver powerful, warming heat. And unlike the other heated insoles, ours provide heat over their entire surface area.

The Gerbing coreheat12 Hybrid Heated Insoles will keep your feet toasty warm, on or off the bike. Because Gerbing's Hybrid Heated Insoles are designed to connect to your other Gerbing's Heated Gear, run them straight off your bike's battery, or you can power them off the Gerbing's 128MVKT Multivolt Battery Kit (sold separately).


  • Utilizes Gerbing's Hybrid Heating System
  • Power directly from a 12 V electrical system, or Power them from one of Gerbing's optional 12 V Lithium battery packs (sold separately)
  • Includes one fused battery harness and Y-harness
  • Heats entire surface area
  • Lifetime warranty on the heating elements
  • Incorporates Gerbing's Microwire® heating technology that uses micro-sized heating fibers
  • Includes Gerbings Glove / Insole Y Harness (ACYH)
  • 1 year warranty


  • Heat: Microwire® heat technology
  • Source: 12-volts DC
  • Current: 1.2 amps/pair
  • Watts: 15 watts

Measurements for Proper Fit:

It's best to have someone do the measuring, relax and enjoy. Let your arms hang naturally by your sides. Have the measuring tape fit snugly against the body and even to the ground. Liners are meant to be worn under outerwear clothing.

  • Chest - Measure around the fullest area of the chest, holding tape firm and level. Hold arms out, place tape, drop arms and record measurement. 
  • Waist - Measure loosely at your natural waistline, typically above your beltline and closer to your bellybutton.
  • Hips - Measure around the fullest part of seat while standing and while sitting. Record the higher number.
  • Outseam - Measure from the top of the waistband to the bottom of the ankle, remember pants and pant liners will lose some length when in the sitting or riding position.
  • Sleeve Length - Measure from the top of the shoulder bone to the bottom of the wrist bone. Measure both arms as one arm may be longer than the other.

Gerbing's Heated Insoles Sizing

Insole Size Men's Shoe Size
XS 4-5
SM 5.5-6.5
MD 7-8
LG 8.5-9.5
XL 10-11
2XL 12-14
Insole Size Women's Boot Size
XS 5-6
SM 6.5-7.5
MD 8-9
LG 9.5-10.5
XL 11-12

Sizing information is provided by the manufacturer and does not guarantee a perfect fit.

Click here to see the full Gerbing Heated Clothing Size Chart
Product Style RevZilla Item # Manufacturer Product # Availability
XS 716669 A-0-140-75-1 In Stock: Ships within 24 hours
SM 716670 A-0-140-75-2 In Stock: Ships within 24 hours
MD 716671 A-0-140-75-3 In Stock: Ships within 24 hours
LG 716672 A-0-140-75-4 Out of Stock
XL 716673 A-0-140-75-5 In Stock: Ships within 24 hours
2XL 716674 A-0-140-75-6 In Stock: Ships within 24 hours


Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.


If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
Gerbing 12V Hybrid Heated Insoles 4.5 5 35 35
Warm feet I slide these in my red wing boots on top of the insoles that are already in there for a fast heat before work in the morning. The fit is great and they hook up easily enough to the wiring harness or the pants. They have kept me warm in cold weather for 1000+ mile rides. I was thinking about the socks at first but I ended up getting these because the reviews were better. Definitely recommend for someone who puts on the miles in rain or shine, cold or warm. September 28, 2015
Nice fit, but could use more juice. I used these boot inserts in conjunction with Gerbing heated gloves via Gerbing control module. While the inserts kept my feet warm, I had to crank the module knob all the way up to get comfortable, compared to a 1/4 turn for the gloves. This made me think that while these boot inserts work, they might be outgunned in really cold weather. For reference I used this product 40-50 degree riding for several hours at a time. Inserts were comfortable and not bulky. September 24, 2015
Not only for Motorcyclists Bought these for high-altitude flights in my glider (sailplane) in Utah. Flights were 5-8 hours at altitudes of 14-18,000'. Since my feet are under the instrument panel in the shade, they get really cold over time. Used a 3-cell LiPo from my RC airplanes of around 3,000 mAh and had capacity for the entire flight. Of course I also used a Gerbig controller. Could not have done these long flights without the heated insoles! March 15, 2015
Husband loves um 2nd pair he has for a 2nd pair of winter boots. Best thing/ February 25, 2015
poor the wiring is lacking, I had issues with the wiring to break about where the boot meets the leg on both pair January 29, 2015
Looks wel made and very comfortable I had Tourmaster heated insoles for 2 years (not too much use) and one of them quit working this year so I decided to go with Gerbing's to match my jacket and pant liners I have had for many years. These fit great, you can trim a bit off if they are too long for your boots, and feel great so there is no hurry to remove them when the day warms up. I'd recommend using them with a dual heat controller, or on their own. My boots are really the only gear that hangs out in the air stream and I found times I'd like to boost the heat on the insoles without the jacket and gloves getting warmer. November 1, 2014
Have not used them yet but looking forward to it I had a pair of heated insoles but they finally wore out I am looking forward to using these they seem like a very good product. I will write more after hunting season. October 28, 2014
Keep your feet warm in the coldest of conditions I've been riding with these down to 35F or so at highway speeds. I don't have a proper foot fairing, just cylinder heads that semi obstruct the wind randomly, but not significantly. I haven't needed to max the innersoles out yet - they actually burn my feet on max and I turn them down. They work as you'd expect, and are still comfortable to walk in for reasonable periods of time. If you are running a Gerbing heated jacket make sure you use a dual zone controller. I find that my foot and jacket temps are totally unrelated. It's nice that they toss in the extension cables to run from your jacket or bike to your shoes. You run this cable through your pants so that your boots can connect to the bottom of your pants. Or, buy their heated pants, although I once had them and found them to be overkill for the temps I'm riding in (lowest 20F or so). In terms of sizing I bought the XXL innersoles for my US 12 / metric 46 feet. The sizing was good and I did not need to trim the innersoles, however they do have an area marked off on the top of the innersole as safe to trim (i.e. you won't cut off electrical wiring). Don't forget to do the math on your bike's charging system and don't overrun it with heated gear. Otherwise you'll be feeling great beating the weather and riding for hours... until you try to restart your bike at a stop and the battery was dead. Consider having a voltmeter installed so you know what's going on if you plan to do significant riding. March 17, 2014
2 3 4 5 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Gerbing 12V Hybrid Heated Insoles? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Gerbing 12V Hybrid Heated Insoles
Already Asked: 6 Questions, 55 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Joe M: I have many Gerbing products that I use and love them they work great,and this one is for my wife. Nov 28, 2015
C M: I chose these insoles to extend my winter riding distance. After reading the reviews on the socks I decided they might be a little too fragile for me so I chose the insoles. I can only go so far with frozen toes. Nov 27, 2015
james a: to keep my feet warm, haven't tried them yet because the weather hasn't turned but I am hoping they work as advertized Aug 11, 2015
Martyn C: I purchased these to use on glider flights in the South Island of New Zealand - flights up to 5-6 hours at up to 25,000 feet. These make such a difference and have proved so reliable that I am buying a second pair as a backup. Also bought Portable Single temp Controller which I am installing in my instrument panel - just a knob and a green LED show from the front. Very nice. Get in, plug in boots, smile and go! Jun 21, 2015
O F: Gerbing Gear is Great and very well made. I have the whole suit and use it for duel purpose. Riding and Hunting. I would have to rate this gear as Excellent May 6, 2015
Rick M: Excellent. Work very well. If your feet get cold, don't be miserable; buy the heated insoles, i doubt very seriously you will ever regret the purchase. Mar 18, 2015
Douglas G: Works as advertised... Feb 28, 2015
bobby p: Didn't like these I have the Gerbings Feb 22, 2015
Becky D: We spoke with Mr. Gerbing at a motorcycle show in Atlanta and he said he found the insoles kept his feet warmer than the socks. Dec 21, 2014
Hart V: Recommended by my son. Dec 7, 2014
Stanley B: For warm feet. Nov 12, 2014
Richard D: quality Nov 10, 2014
Peter C: I bought these to keep my toes warm as I ride year round in upstate NY, down to 15 degrees F or so. At the end of one season, the cables tore out of the soles due to taking my feet in and out of the boots, so I'm trying Tourmaster Synergy 2.0 this year (2014) Nov 9, 2014
R N: These heated insoles will heat the whole foot. All off the heated socks I looked at just heated your toes. Plus, these will be great for ice fishing since all of my toes and heals have frostbite. Oct 7, 2014
Chuck J: Looks like it was a good product by the reviews. Oct 7, 2014
Tim D: Just found out my Tourmaster heated insoles do not work any more. I have Gerbing gear, since 1999, and decided to go back to them. Planning an upgrade to current Gerbing gear soon so this will definitely be compatible. I've tried Gerbing socks in the past and hate walking on those blasted wires. Oct 5, 2014
J O: Well, I wanted to keep my feet warm. I bought these and holy hell, yes you can burn your feet straight out of your boots if you have the power to do so. Make sure you use this in combination with a multi-zone controller because you will NOT want your feet warmed at the same electrical level as your jacket/vest etc. In terms of sizing, they seemed to fit true to norms. Oct 2, 2014
Jeff S: I already had Gerbing pant liners so I felt this would be a good addition Aug 24, 2014
Robert S: Keep my feet warm riding high alpine roads in the eastern alps of Eurtope. Aug 19, 2014
John H: Makes winter riding possible! Jun 23, 2014
Michael L: I can't use these because they are so bulky I can't wear them with my riding boots. The Gerbing sock liners work much better. Mar 3, 2014
Steve C: Traveling to prudhoe bay AK. Have issues keeping feet warm in very cold conditions. Have jacket liner and gloves now. They work great. Will use these as needed. Went with insoles over socks to not limit walking......and expect better durability. We will see. Jan 26, 2014
Michael P: Cold feet...jeez Jan 10, 2014
Herbert K: Seems to be the most effective insole in the market, concerned about long term durability. Already have LiPo batteries to power these. (Non motorcycle use intended) Jan 9, 2014
James S: never tried anything like these Thought I would Jan 4, 2014
Eric R: These insoles are great. I wear a size 10 and got the size 11 where I could cut it down a touch. The warm slowly (when using a temp controller) and if I my ankles get a little cold (I have leather boots, hightop length) I just wiggle my feet and the warm air moves from the soles to around my ankle. Im riding in 35 degrees and have no problems with cold feet. Comfortable and worth every penny. If you needed to you can also want in them as they have nice padding. Dec 26, 2013
Renee A: This is nice, but not sure that they were better than the heated socksâ?¦ Defenetly better than nothing, but the top of the feet stays cold.. Dec 23, 2013
Jonathan R L: I do lot winter activity from 4-wheeling, deer& predator hunting & motor cycling wanted give this item a try to see it meets my needs. Dec 12, 2013
Randal D: More pieces to the collection. Dec 9, 2013
Michael S: THESE REALLY WORK GREAT ! These are way better than heated or insulated socks. These are very comfortable while riding and walking. My feet used be cold all the time, I used these during a 20 -30 degree all day ride and my feet were "toasty warm" all day. I highly recommend these heated insoles to anyone who gets cold feet. Nov 5, 2013
Henry O W: I ride ATV year round in SW ND, and I freeze in a short time ,a friend told me about this gear,SOUNDS GREAT, I will soon find out. Will be using glove, jacket,pants,boot,and sock,liners with dual temp controller Oct 13, 2013
A shopper asked: can u walk on the heated insoles? Oct 30, 2011
Answer this · Send to friends Good question? Yes (0) No (0)
mcorr57: absolutely! I removed the stock insoles from my Tourmaster response boots and put the gerbings in their place. Except for a little less support around the outside edge of the heels I haven't noticed a diffence. They are built to withstand lots of walking, standing, etc. Mar 18, 2013
Reply to mcorr57 Good answer? Yes (1) No (0)
Spock: Yes . You must make sure you hold on to the wire at the top of your boots while slipping your foot in so your foot doesn't drag extra wire down . In this way you won't have a coil of extra wire under your foot . I learned that the rirst time I used the pads. Having this extra wire under foot maks for an uncomfortable condition when standing or walking . Once you get that down which takes only seconds to pick up your home free Jan 16, 2012
Reply to Spock Good answer? Yes (0) No (0)
K12RSGuy: Being that your feet are on top of them inside your boot yes. You will not feel the wires like I can a bit with the Gerbing electric socks that I have. The insoles should be nicer and easier to use. Oct 31, 2011
Reply to K12RSGuy Good answer? Yes (0) No (0)
BThompson: Yes, you can walk on the heated soles. At first they are a little uncomfortable in the arch of the foot but after a few days of use they are great. Dec 31, 2011
Reply to BThompson Good answer? Yes (0) No (0)
Kent: Occasionally I know the cord is there while riding or walking, but it's minor. the insoles are as comfortable to walk in as the TCX Xfive ever was. Nov 7, 2011
Reply to Kent Good answer? Yes (0) No (0)
Robertavery: I have had no problems walking with my Heated Insoles. They are very much like the stock foot bed. Nov 14, 2011
Reply to Robertavery Good answer? Yes (0) No (0)
Kitowsr: Yes just did for two days and they are quite comfortable.but them in and ride or walk. May 20, 2013
Reply to Kitowsr Good answer? Yes (0) No (0)
Cameron G asked: Im a skinny guy and like my heat. Will I be able to hook up the insoles, pants, jacket, and gloves at the same time without melting the wiring of my bike? I have a Ducati 848 Evo and a Ninja 650abs Nov 25, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Jason P: Cameron G - I am a police motorcycle officer and use these everyday I work when it's cold out. I have insoles, jacket, and two different styles of heated gloves all by Gerbing. I use the dual controller so I can adjust my jacket seperatly from my gloves and insoles. I am plugged in most of my 12 hr workday and have never had a problem with the wiring. I think I have only gone through one fuse in the 3 years I've had them. The wiring actually connects directly to your battery so there is no possible way to damage anything on the bike. They are worth every penny. My feet feel like I'm sitting inside when I have them on, even on the coldest of days. Nov 25, 2013
Reply to Jason Good answer? Yes (1) No (0)
james h: I ride a CTX700, I would have to venture a guess that your bikes, Cameron have a similar output profile to mine. If that's the case then I think you would be overloading it. I plan to ride with a jacket liner and maybe pants plugged in, I use external battery powered devices to keep from stressing the electrical system.
The reading I've done on the subject points to not even turning this stuff on until your at least close to half of your maximum rpm's if not higher, different engine/alternator combo's provide median or maximum output of energy at different ranges but i'd avoid turning any of that on until your underway and not leaving it on when the bike is only idling. A Voltage/Amperage draw indicator would be highly recommnended.
Weather where I live ranges between 25-50 degrees F, ambient temp not counting windchill, during the cold months.
Ask your respective local bike technicians or manufacturers of said bikes to find out how much power is being generated at what RPM ranges, or if your a enterprising individual put your bike on a stand and put a volt meter on a feed from the alternator to find out.
Jan 13, 2015
Reply to james Good answer? Yes (0) No (0)
Douglas S: I see your problem. Using the installation guide that comes with gear, the total amperage draw for your setup works out to 15.3. Is it safe to go to a 20-amp fuse? I ride with just the insoles, jacket liner, and T-5 gloves coupled to a 15-amp circuit all the time and have never had any problem. In your case, I would call the manufacturer. Gerbing's ought to know. Nov 25, 2013
Reply to Douglas Good answer? Yes (0) No (0)
Donald W: Yes it should work. Just check the amperage draw for that amount of gear using the paperwork included when you bought them. Ask your dealer if the alternator will handle that amount of draw. I would hook it directly to the battery and make sure the fuse is large enough to support the draw. A dual controller is a must in my opinion. Nov 25, 2013
Reply to Donald Good answer? Yes (0) No (0)
Herbert K: That depends on the wiring on your Ducati. I have a 2008 BMW R1200RT. I plug a jacket, gloves, and insoles into a socket that goes directly to the battery. I do use the factory plug for a heated vest. Nov 25, 2013
Reply to Herbert Good answer? Yes (0) No (0)
Cameron G: Thank you so much! And thank you for keeping our streets safe =) Its very admirable to do so on a motorcycle, especially in this weather! Always wanted to be a k-9 cop myself.....anyway, stay safe!! Nov 25, 2013
Reply to Cameron Good answer? Yes (0) No (0)
A shopper asked: How thick are these? Do they compare in thickness to a standard boot insole? My concern is a build-up in my boot and therefore my boots will not fit the same. Dec 29, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Robert G: They are a tad bit thicker than the original insoles that came with my HD boots but didn't change the fit of the boots at all. They are absolutely amazing. I have the insoles linked through my heated jacket liner. I also have a dual temp controller that controls my gloves on one leg and the jacket and boot insoles on the second leg. They keep your feet very warm!! Again, a great product.

Hope this helps.
Dec 29, 2013
Reply to Robert Good answer? Yes (0) No (0)
Douglas S: I wear these with a pair of custom-made White's heavy leather boots built on the Smokejumper last. The boots have an usually high arch, and these work fine. I just loosen the laces a bit to allow for the thicker footbed. If I have a complaint, it is that the heated insoles sometimes will get too hot for comfort for no apparent reason, and I'll have to lower the temperature. Dec 29, 2013
Reply to Douglas Good answer? Yes (0) No (0)
Richard S: My Gerbing 12V Hybrid Heated Insoles measure .250 uncompressed at the toe. When I use my insoles I simply remove the original insole and insert my heated insole. It takes less than 10 seconds to switch out. To double stack the insoles would make it to high for my boot. Dec 29, 2013
Reply to Richard Good answer? Yes (0) No (0)
Martin T: They vary from about 3/8" at the heel tg about 1/4" at the toes. It would be best if you could remove your existing insole before putting them in. That way the build-up will only be slightly more than with the standard insole. Dec 30, 2013
Reply to Martin Good answer? Yes (0) No (0)
A shopper asked: My husband wears an 11.5 shoe and usually a 12 boot. The size chart shows an XL- 10-11 and a 2XL- 12-14. He could use the 12 however to go up to a 14 would be huge. Can you cut them down? Which size would you recommend? Dec 9, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Ashton E: I would suggest the XL-10 to 11 size for two main reasons.
1-Even though you have markings on the insoles to cut the 2XL down to size, you can't be sure if you may need to cut below these to get the desired fit. You risk cutting the heating elements.
2-Most riding boots are made to fit either snug or close to maintain dexterity (we control with our feet). Getting the XL ensures it will fit in the existing size 12 boot even if it doesn't reach the very tip of the toe while using the entire length of the heating elements.

IE: better safe than uncomfortable or worse, cutting the elements and exposing them!

I wear mine in a pair of Puma VX2000s. I didnt have to cut but I do notice that the elements don't heat all the way to the tip of your toe so getting the XL will be a benefit for him to get the full length of heat for his size 12.
Dec 10, 2013
Reply to Ashton Good answer? Yes (0) No (0)
Christopher P: You can cut them down by 1/4 inch. For a Sidi boot an XL will fit up to a size 11 with maybe just a hair of trimming (fits my size 10 boot with just a tiny space at the front). Depending on your husband's actual boot size I would probably recommend a 2XL and then trim. If his boot size is closer to an 11 then get the XL - your toes usually don't don't the very front of a boot anyway.
p.s. these soles work great.
Dec 10, 2013
Reply to Christopher Good answer? Yes (0) No (0)
A s: I wear a twelve boot as well and bought the xl and they work great. Good luck. I love all the gerbing heated gear. Ride safe Dec 10, 2013
Reply to A Good answer? Yes (0) No (0)
Emmett C: I would get the larger size and cut them down.. However if I was going to do it over I would get the socks instead of the inserts Dec 11, 2013
Reply to Emmett Good answer? Yes (0) No (0)
A shopper asked: I need this for work not riding. What accessories do i need, battery packs wires etc, are lithium ion batteries available? Nov 26, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
Goose1200rt: Insole where cablee feed may not be comfortable for work. Feb 8, 2013
Reply to Goose1200rt Good answer? Yes (0) No (0)
RevZilla: The Gerbing's Hybrid Heated Insoles will come with all the wires that you need to plug these into the Gerbing's Two 12V Hybrid Batteries + Charger Kit (Sold Separately). In this package you will get two insoles, the fuses that you would need if you were to wire them to a bike, and the wires that would run from the insoles to your power source (either the bike or the Gerbing's Battery packs).

Nov 27, 2012
Reply to RevZilla Good answer? Yes (0) No (1)