Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Drop us your email and we'll let you know when it's in.
Calling all stop-'n'-go city riders! Maybe you have the Kung-Fu grip strength of a small child, maybe your clutch springs look like valve springs. No matter what your clutch pull issue is, Burly Brand has got you covered with their easy clutch.
A simple mechanical extension of the clutch actuator, the Easyboy installs pretty quickly with a minimum of misery. If you're looking for better feel, more modulation, and (of course) a gentler pull, slap a Lite Clutch on your rig.
Have a functionality, fit, or otherwise product-specific question about the Burly Easyboy Lite Clutch For Harley Big Twin 2000-2015? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.
Rosie S: Quick and easy method and installation to lighten clutch pull on new Harley.Feb 20, 2014
Gerald C: It's really the only solution to make the big twin's clutch easy to use in traffic. Third one I've installed ! Really easy install - if you have the tools and a little experience with HarleysNov 20, 2013
A shopper asked:If this can not be used with a hydraulic clutch, what can? My wife has short fingers and some arthritis...not much grip strength.Aug 17, 2014
A shopper asked:The spacers on the cable, If put the spacer on the cable I don't have enough thread to screw the cable into the trans side cover. Are both spacers needed or can I just use the spacer by the handle?Aug 7, 2014
Gerald C:I have put 4 of these on big twins and always had enough thread left using the bottom (metal) spacer. It is harder to put back in with the spacer. Remember the threaded cable goes back into the tranny cover at an unusual outward angle. I have had to use the additional top spacer only one time.Aug 9, 2014
Mark C:Dear Revzilla, The Burley Boy Easy Pull was very easy to install. You must remove the outer transmission cover to install it. The biggest difficulty was getting clearance between the trans cover and the exhaust pipes on the '04 Electra Glide. I was able to loosen the pipes at the heads and move them enough to get the cover off. As far as figment to the '04 Superglide, you will have to answer that for the customer. The instructions that were included were simple and adequate. Thanks for asking, Mark Cox aka TallboyMay 21, 2014
A shopper asked:Will This Work On A Hydraulic Clutch Bike? And Which One Would l Get, l Have A 2011 Road Glide, We Installed The Hydraulic Clutch (harley of course) Bike Has A Race Clutch And 120r Motor And That Clutch Is HARD AS HELL to pull In HELP!!! l Want That Clutch Easy To I Can Feather It And Take Off Like A Rocket
A S asked:Spacers: If I try to use the spacer by the housing there isn't enough thread to screw the cable into the housing. Are both spacers required or can I just use the spacer by the handle?Aug 7, 2014