TC Bros Weld-On Solo Seat Front Pivot

This pivot bracket is made from one piece of 3/16" steel for the ultimate in strength and simplicity. Unlike welded pivot brackets, the one piece design eliminates the possibility of a cracked seat pivot bracket caused by a failed weld. It also makes for a very low profile that looks great on just about every aftermarket spring style solo seat made. The long slotted holes permit a wide range of fitment and allow for adjustability. The finish on the bracket is black powder-coat for durability. This simple design also permits the weld-on mount to be mounted to either a round frame tube or a flat surface without a standoff and without interference with the pivoting action, thanks to the weld-on pivot mount being slightly larger in diameter than the rest of the components. The weld-on pivot mount is raw finish steel and ready to weld. The 3/8" hex socket cap bolt is stainless steel, as well as the washer and nylock nut, to avoid rusting. Finally, the replaceable bushings are oil impregnated bronze for a squeak free ride and very long life. Fitment possibilities are nearly endless. If you have a solo seat with springs on it, this bracket will probably fit.

Features:

• Pivot bracket is made from one piece of 3/16" steel
• Long slotted holes permit a wide range of fitment
• Bracket is powder-coated
• Weld-on pivot mount is raw finish steel
• Stainless steel 3/8" hex socket cap bolt and nylock nut
• Replaceable bushings are oil impregnated bronze
• Made in the USA