Skip to Main Content
Search Suggestions
Menu

We're sorry but all Size / Color combinations for this product are currently out of stock.

You can be notified upon their arrival by choosing the Size and Color options you are interested in and then entering your email in the box below.

Open-Box
SW-MOTECH

SW-MOTECH 7/8" Handlebar Risers Black / 30MM [Blemished - Very Good]

Item: P379429
0 Read 0 Reviews Write a Review
$56.66
$62.95
Save $6.29 10%
Rebate Available! View Details

Product Details

Note: This is a new item that has light cosmetic damage which may include, but is not limited to scuffs, scratches, stains, chips or dings. The damage affects the aesthetics but not the function of the item. The original packaging may or may not be present.

SW-MOTECH 7/8" Handlebar Risers 

Provides a more upright, comfortable riding position by raising the original 7/8" (22mm) diameter tubular handlebar. These high quality bar risers increase comfort, look great, and are easy to install. 

No need to replace your handlebars. Simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the top clamp using the included hardware. For use with original top clamp or included matching SW-MOTECH top clamp.

Includes:

  • 1 pair of riser blocks 
  • 1 pair of top clamps
  • 2 sets of screws
  • 20mm height risers include four M8x55 screws and four M8x60 screws
  • 25mm height risers include four M8x60 screws and four M8x65 screws
  • 30mm height risers include four M8x65 screws and four M8x70 screws
  • 50mm height risers include four M8x90 screws
Product Style RevZilla Item # Store Sku MFR. Product # Availability
Product Style Black / 30MM RevZilla Item #1217413 Store Sku MFR. Product #LEH.00.039.150/30/B AvailabilityOut of Stock
Please review this product's fitment notes & exceptions prior to purchase: Add to Cart
Fitment Notes & Exceptions
  • This riser will fit your bike if: 
  1. Your bar mounts are symmetrical and parallel
  2. Your bars are 7/8" outer diameter
  3. You have two M8 (8mm-diameter holes with standard M8 thread pitch) threaded holes in each of your two bar mounts
  4. The distance between the two holes in a single bar mount is 31-37mm on center. The distance between the two bar mounts is not a factor
  • These handlebar risers will only fit standard handlebar mounts that are symmetrical and perpendicular to each other; as such, these handlebar risers will not fit the Kawasaki Z1000, Kawasaki Z750S, or any other motorcycle with asymmetrical handlebar mounts.
  • Not all riser heights will fit on every motorcycle. You must check for adequate cable/wiring/hose slack before and after installation.
  • When installed, there may be a slight gap between the bar riser and the top clamp. This gap allows the top clamps to be torque-tightened onto the bar riser to prevent the bar from spinning. 
Product Description
Part Numbers
Fitment
0 Customer Reviews
0 Questions & 0 Answers
Join now & get rewarded!

Get Free 2-Day Shipping and $15 + 5% RPM Cash on this order.

Already enrolled in RPM? Link your existing membership here.

Reviews & Questions