Note: This item has been previously installed. Signs of installation may be present including opened packaging and minor scratches. The item may be missing tags, manuals or installation instructions, however it is fully functional.

SW-MOTECH 1 1/8" Barback Offset Handlebar Risers

Provides a more upright, comfortable riding position by raising and retracting the original 1 1/8" (28mm) diameter handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

When installed, there may be a slight gap between the bar riser and the top clamp. This gap allows the top clamps to be torque-tightened onto the bar riser to prevent the bar from spinning. 

Kit Includes:

• Barbacks for 1 1/8" bars (1 pair) 
• Top clamps for 1 1/8" bars (1 pair) 
• Four M8x30 screws 
• Four M8x20 screws