We're sorry but this product is currently out of stock. You can be notified of its arrival by entering your email in the yellow box below.
Out of Stock
SW-MOTECH 1 1/8" Barback Offset Handlebar Risers
  • SW-MOTECH 1 1/8" Barback Offset Handlebar Risers - Black

Please select a to check availability, or to add this item to your Shopping Cart or Wish List.




Select qty:

Please select a to view availability.
Add to Wish List

Video Review

SW-MOTECH 1 1/8" Barback Offset Handlebar Risers Videos

SW-MOTECH 1 1/8" Barback Offset Handlebar Risers

Provides a more upright, comfortable riding position by raising and retracting the original 1 1/8" (28mm) diameter handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 30mm (1.25") and move them back 22mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.

When installed, there may be a slight gap between the bar riser and the top clamp. This gap allows the top clamps to be torque-tightened onto the bar riser to prevent the bar from spinning. 

Kit Includes:

  • Barbacks for 1 1/8" bars (1 pair) 
  • Top clamps for 1 1/8" bars (1 pair) 
  • Four M8x30 screws 
  • Four M8x20 screws

Note: Please read below fitment notes prior to ordering.


3.5 / 5
Bang For The Buck
4.5 / 5
4.8 / 5
4.8 / 5
Ease Of Install
4.3 / 5
Fit & Finish
4.8 / 5
4.7 / 5

Fitment Notes & Exceptions

This is a universal fit part; it may or may not fit without modification.

  • Please follow all Torque Specifications to the letter Failure to do this will void warranty
  • While installation of these barbacks is possible on many bikes, such installation sometimes requires rerouting or extending the original hoses or cables
  • This riser will fit your bike if:
    • Your bar mounts are symmetrical and parallel 
    • Your bars have a 28mm (1 1/8") outer diameter 
    • You have two M8 (8mm-diameter holes with standard M8 thread pitch) threaded holes in each of your two bar mounts 
    • The distance between the two holes in a single bar mount is 30-37mm on center. The distance between the two bar mounts is not a factor
Product Style RevZilla Item # Manufacturer Product # Availability
Black / 31.75mm Rise / 25.4mm Pullback 1035166 LEH.00.039.20000/B Out of Stock


Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.


If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
There are no reviews for this item. Write Review
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the SW-MOTECH 1 1/8" Barback Offset Handlebar Risers? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!