It was a breeze to install. Looks good on my bike. I have an aftermarket round 7" headlight on my '15 Vulcan S, and this sits just above it nicely. I had to put some electrical tape to keep it from rubbing loudly against the headlight.

It stays in place fairly well when tightened, but that doesn't mean it won't shift with enough force. She stays in place at 105mph. It serves as light wind management, rain protection for my electronics that sit below it, and for aesthetics.

Its a great shield if you are looking for slight wind protection and do not want a big old bike cop windscreen. I think it would work well with any bike that is sporty in aesthetics.

Put this on my 2002 V-Rod in combination with the MRA X-creen touring. Looks great on the bike and with the x-creen in the up position protects me well from the rain. Highly recommend the MRA line.

Bought this for my 2017 Sportster 48. It was exactly what I was wanting. Took the wind off my chest, removed the the overwhelming wind noise. This also was a perfect look for the bike.

all good except bolts striped out immeditley just glad its mounted where needs to be

searched by bike and this screen came up, most likely as universal. However no space on FZ07 handle bars to mount this screen.

This review includes installing the windshield with the Ducati bike specific mount. First of all, the bike specific mount was for a Diavel and not a HyperMotard so I was skeptical about it. I had a very tough time removing the handlebar mounted screws. They were tightened so much that I shaved off parts of the screw when trying to undo them. After almost an hour, I was able to get them undone. To install this on a Hyper, you have to remove any additional windscreen like the one I had - smoked touring screen.
The two front screws on the handlebar were undone, and I fixed the MRA bike specific mount one at a time. The parts were a bit tight in the beginning and I had to use a loft of effort to assemble some of the parts. After a bit of fiddling around, I was able to align them, with trial and error because you have to loosen and tighten the screw to facilitate rotating the pivot. Once the two mounts(LH and RH) were fixed, mounting of the screen was a breeze.
I am hoping that this windshield will reduce the wind on my chest at highway speeds. I have not tried it yet.
Overall it looks pretty decent and I would recommend it.