I bought both a set of the amber and red for my 2016 Sportster. The pieces themselves look amazing. It comes in three pieces which are screwed together: the bottom piece is the colored lens, in the middle is the wire mesh, and the top layer is a metal ring. The three are held together by two hex-key screws. When putting them together you must take EXTRAORDINARY care not to strip the screws, the threads in the colored lens are awful and the three pieces must be screwed down very far to prevent everything from wiggling around. I was as delicate as I could possibly be and still stripped one of the screws about 3/4 of the way down. Once I got them on the signal assembly I noticed a gap where you can see light coming through, the metal outer ring is not flush with your signal housing. I don't know if this was done on purpose to make your lights visible from the side but It doesn't look good. The final annoyance is that the clips on the colored lens which attach to your signal housing are very weak, they rotate quite easily and I am genuinely worried at least one of them will pop off the first time I hit a hard bump. They look fantastic though and now that they're on I don't see myself removing them, it's entirely possible I will try to run a thin piece of black tape around them to cover up the visible gap as well as ensure they don't fall off.

Excellent style and look but definitely not durable. Very delicate. Had to constantly tighten them after each ride and the eventually both popped off during a cruise the other day. Unfortunate

After installing these on my 2016 Sportster 48 they did not sit flush in the signal housing and had a gap and was not a clean fit for my satisfaction. I have since then return the item for full refund.

Great signal covers easy to install less than 5 min each, gives your bike an aggressive custom look great buy.