G2 Throttle Tamer Yamaha FJR1300 2003-2010
Savings (10%):

Select qty:

Add to Wish List

G2 Throttle Tamer Yamaha FJR1300

G2's challenge was to improve control of over-responsive power characteristics of most fuel injected motorcycles. Their solution is the throttle tamer.

The Throttle Tamer incorporates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening.  The “pulley”, or as they call it, “cam” pulls the throttle cable as the rider rotates the grip/tube.  By altering the conventional, circular shaped cam, a vast improvement in control is achieved.

The Throttle Tamer has a cam with a reduced radius initially, which requires a slightly farther rotation to achieve the same carburetor or throttle body opening position as a stock throttle.  This virtually eliminates the jerky “throttle snatch” especially evident in modern fuel injected street bikes.  The radius increases or “ramps up” after ½ throttle to keep overall rotation required to reach full throttle at or near stock rotation.


  • Machined from 6061 aluminum in the USA
  • Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel
  • Included cam is removable and can be replaced with alternate cams (sold separately) to fine tune control
  • Fits inside the stock throttle housing to stock cables
  • Works with all known aftermarket cruise controls
  • Slide your grip unto the Throttle Tamer

Note: Image for reference only. Actual G2 Throttle Tamer may vary depending on your bike's make and model.

4.4 / 5
Bang For The Buck
5 / 5
5 / 5
5 / 5
Ease Of Install
5 / 5
Fit & Finish
5 / 5
5 / 5
This Product Fits:
FJR1300 20032010
FJR1300A ABS 20032010
Product Style RevZilla Item # Manufacturer Product # Availability
G2 Throttle Tamer Yamaha FJR1300 2003-2010 921956 40-400 In Stock: Ships within 24 hours


Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.


If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Bang For The Buck
3.7 / 5
Ease Of Install
5.0 / 5
5.0 / 5
Bang For The Buck
4 / 5
Ease Of Install
5 / 5
5 / 5
Works great
If you have a Yamaha FJR1300 with a snatchy throttle, this will help quite a bit. I also recommend looking up the throttle spring unwind mod. Together those two things greatly improved the comfort and throttle control on my 2007.
July 7, 2014
Bang For The Buck
5 / 5
Worked as advertised
I purchased this for an 07 FJR1300. It promised to tame the jerky throttle response. It did exactly that. Took about 5 min. to install could not be happier.
April 7, 2014
2007 Yamaha XV1700ATS Road Star Silverado S
G2 makes positive difference!
The G2 throttle tamer, along with a Power Commander III, were installed at the same time on my 2007 Yamaha FJR1300 to address a very sensitive throttle and surging that made low speed control extremely difficult and unpleasant (this problem is inherent with 06 & 07 year of the FJR). The throttle now works outstanding at low speed without any surging. I am able to idle around corners smoothly or gently let out the clutch without throttle and idle along smoothly at low speed. I'm not sure how much is attributed to the G2 and how much to the PCIII but the combined results are excellent.
March 10, 2014
2007 Yamaha FJR1300A ABS
Bang For The Buck
2 / 5
Ease Of Install
5 / 5
Good product but pricy (works with Kaoko throttle lock)
I have owned a 2006 FJR1300 for over a year now and have put many thousands of miles on it. When I bought it I was appalled that they would allow a throttle that touchy. Just as the previous owner said, I got used to it but it was always frustrating and made low RPM maneuvering choppy and difficult. The reviews for this item were all good and I had a close call trying to maneuver my bike in a tight parking lot on a long ride when the bike was heavy and almost dropped it so I decided to give it a try.

Just as stated it was very easy to install. A puff of air from a compressor got my grip off then 2 allen bolts got the cuff that holds the tube off. Once the old one was off and the bar was cleaned up the new one went right back on. I run a Kaoko throttle lock (because im too cheap for cruse) and it works just fine with it.

Rode it this morning and I can already see a very clear difference in low RPM throttle response, it is much smother. I was surprised that it was this noticeable. It is a well made product with clear instructions that addresses a problem and fixes it but I still feel that it is a little too expensive for what it is.
May 24, 2016
1 year ago
2006 Yamaha FJR1300A ABS
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the G2 Throttle Tamer Yamaha FJR1300 2003-2010? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.