Dynojet Power Commander V For Harley Dyna 2012-2017
Zoom
  • Dynojet Power Commander V For Harley Dyna 2012-2017
MSRP
$399.99
Savings (15%):
$60.00
Price
$339.99

Select qty:

Add to Wish List

Video Reviews (3)

Dynojet Power Commander V For Harley Dyna 2012-2017 Videos

This product is legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway.

Dynojet Power Commander V For Harley Dyna

The Dynojet Power Commander V for Harley-Davidson models represents one of the best performance values in the industry. Unlocking untapped potential from your Harley is made simple for the end user with Dynojet's latest addition to the Power Commander series. Air/fuel ratios, spark control, and cylinder temperatures can now be altered without complication or headaches. Power Commander V puts you in full control of your bike, and allows it to run like it was designed to.

Features:

  • Offers fuel and timing control
  • Rev Xtend allows increase of rev limit
  • Allows reading of vehicle temperature through bike's ECM, enabling the PC V to add more fuel during cold starts
  • Cold starting on heavily modified engines becomes more controllable and easy to adjust
  • J1850 data is not available on this Power Commander
  • Smaller than the PC III Quick and easy installation - install, tune, and ride in just minutes!
  • USB receives power from computer - no additional power source needed
  • Two-position map switching function built in (switch not included)
  • Gear/Speed input allows for map adjustment based on gear
  • Analog input allows user to install any 0-5V reference signal sensor
  • Adjustment table capability for heavily modified engines
  • Allows each cylinder to be mapped individually
  • Ten throttle position columns
  • World's largest dyno-tested map database
  • Enhanced 'accelerator pump' utility
  • Made in the USA

Resources:

4.2 / 5
Bang For The Buck
5 / 5
Features
5 / 5
Style
4 / 5
Ease Of Install
5 / 5
Fit & Finish
4 / 5
Durability
5 / 5

Fitment Notes & Exceptions

  • Will not fit Dyna 110 models
This Product Fits:
Harley Davidson
Dyna Fat Bob FXDF 20122017
Dyna Low Rider FXDL/I 2014, 2015, 2016, 2017
Dyna Street Bob FXDB/I 20122017
Dyna Super Glide Custom FXDC/I 2012, 2013, 2014
Dyna Switchback FLD 2012, 2013, 2014, 2015, 2016
Dyna Wide Glide FXDWG/I 20122017
Product Style RevZilla Item # Manufacturer Product # Availability
Dynojet Power Commander V For Harley Dyna 2012-2017 867068 15-022 In Stock: Ships within 24 hours

Shipping

Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.

Returns

If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Bang For The Buck
4.8 / 5
Features
5.0 / 5
Style
5.0 / 5
Ease Of Install
4.2 / 5
Fit & Finish
5.0 / 5
Durability
5.0 / 5
Bang For The Buck
5 / 5
Ease Of Install
5 / 5
Durability
5 / 5
Quick and easy horsepower. Endless tuning capability.
The PCV is easy to install, easy to map, and even better to ride. Not to mention the endless dyno tune capability. Thanks to Revzilla, it's offered at a great price!
April 24, 2015
Bang For The Buck
5 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
5 / 5
Durability
5 / 5
Totally awesome!
Love this product! I can tune, troubleshoot, and continue to modify my ride and this product will work with anything that I use! Simple install and easy to use even for a tech-idiot like me!
March 9, 2017
Purchased
1 year ago
Bang For The Buck
4 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
5 / 5
Fit & Finish
5 / 5
Durability
5 / 5
Works great
Was an easy install, and works great after I had the dealership dyno my bike.
September 14, 2016
Purchased
1 year ago
Ride:
2016 Harley Davidson Dyna Low Rider FXDL/I
Bang For The Buck
5 / 5
Features
5 / 5
Style
5 / 5
Ease Of Install
2 / 5
Fit & Finish
5 / 5
Durability
5 / 5
Please read if you have Mac & plan to DIY
I just finished installing this last night. I did it myself. I've never worked on motorcycles (or even cars before). Maybe some of the other users have and that's what made it easier for them, but it was not the easiest thing for me. That said, if you have time & patience, you can do it.

The main thing that makes it hard is the routing. You'll have to remove the fuse (don't disconnect) and the diag so you can pass the 4 PCV plug ends through. Once they're through you might still have issues connecting. I had to fiddle with the harness a lot to get it to go in. There's a switch you push down on on the top of the plug ends that you usually push down on when you REMOVE the plug. I had to fiddle with this to get some of the cables to plug in because they are in slightly different positions than the OEM plug ends.

After all that is done you have to make sure you have a WINDOWS laptop. The software will not work on a Mac (lucky me, as I have a Mac!). This is kind of annoying to me. It's 2017 guys, get with it, Macs are popular. So I had to download a trial version of Parallels, then torrent Windows XP just so I could download the software and run it. You CANNOT run Crossover or just the app itself, you have to run the app from within a Windows environment. The reason for this is because the software will not "see" your bike without updating the firmware. The firmware update is prompted only on Windows PC when you plug in the USB cable, it will automatically download the firmware for you. This is the same process if you use an external HD via USB for the first time on a Windows -- the system won't see the HD when you first plug it in but it will notice something new is plugged into the USB port and will automatically find the firmware to read the USB information. Same thing here.

So this is why I give it only 2 stars for Ease of Install. There's no warning this only works on PC. Many people have Macs and if's a real pain in the ass to get this program working. The routing is also tricky and it takes a lot of patience and having slender fingers is helpful too. I'm not sure how guys with thick/fat fingers route these things, sh*t is hard.

Anyway, it's all installed and ready to go but figuring out how to fine tune it is tricky also, so I'm just now diving in. But all in all it's an awesome product. Cheers!
May 20, 2017
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Dynojet Power Commander V For Harley Dyna 2012-2017? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 35 questions Browse 35 questions and 25 answers
Why did you choose this?
RevZilla Store
reviews
Greg G on Aug 4, 2017
because i wanna go fast!
josh o on Jun 22, 2015
reviews
Greg G on Aug 4, 2017
to upgrade my fuel map
Daniel C on Feb 14, 2016
because i wanna go fast!
josh o on Jun 22, 2015
The multiple options provided by the unit, coupled with the price, made purchasing the PC V a no-brainer.
Ray S on Apr 24, 2015
Product reputation, and I also spoke with a Revzilla employee who was very helpful
Daniel M on Jan 7, 2014
to upgrade my fuel map
Daniel C on Feb 14, 2016
The multiple options provided by the unit, coupled with the price, made purchasing the PC V a no-brainer.
Ray S on Apr 24, 2015
Hi:
I just purchased a set of Vance& Hines Big-Radius pipes from Revzilla for my 2013 Harley Wide Glide. I am interested in either purchasing a V&H Fuelpak or the DynoJet Power Commander V for the same bike. Question? I know a lot more can be done down the road with the Power Commander. But it seems less straight forward to install. I did a quick overview of the instructions online, and I noticed that the O2 censer gets disconnected and left disconnected in the process. What is done with the O2 wires going from the censers at the pipes to the plug harness? Do I just disconnect them and leave them there? The FuelPak seems a simpler process, just plug & play, but it’s down the road applications are limited.
Dan McNeil
A shopper on Jan 1, 2014
BEST ANSWER: Congratulations on your Vance and Hines Big Radius purchase, they're awesome! I completely understand your debate of purchasing the Fuelpak vs Power Commander V, I had all the same questions you do. The main feature that swayed me towards the Power Commander V was the ability to use this fuel management system on other pipes. The installation was very straight forward, the part that took the most amount of time was making sure that the wiring was tucked away and out of sight. The reps at dyno jet are very helpful as well, I called them to ask for the best configuration for my pipes and they emailed me one in no time. As for the O2 sensors, the PCV comes with caps to close out the sensors, they snap on and away you go! I don't regret going with the PCV ( power commander V ), I just got another set of pipes and I'll just drop a different config into the PCV, super easy, and I'm good to go. No matter which system you go with you'll be fine but the PCV is a lot more versatile. Good luck and safe ride. See ya on the road!