Dynojet Power Commander V EX Yamaha R1

The Dynojet Power Commander V EX is approved for street use by the California Air Resources Board (CARB). It includes the best features of the standard Power Commander V but limits adjustability to higher RPMs and throttle positions to hit emission targets. It otherwise has all of the features of the standard Power Commander V.

The Dynojet Power Commander V is a vital first step into the world of motorcycle fuel tuning. The ability to adjust your motorcycle’s fuel map is vital if you have added a high-flow air filter, aftermarket exhaust system or smog block-off plates. All of these modifications will, in some way, alter the air/fuel ratio in your engine. The Dynojet PCV, with its microprocessors and PCV Software, allows you to adjust your motorcycle’s fuel map up to +250%/-100% to ensure an optimal setting. Dynojet offers a large database of free, downloadable maps for many combinations of motorcycles and aftermarket parts.

If an available map does not suit your specific needs, a custom map can be built from the ground up with the aid of a Dyno. Furthermore, a fuel map can be customized on a per gear, per RPM and per throttle position basis. Both street and track riders will benefit from from the PCV. For example, a daily commuter may find it beneficial to have a low end torque map while the club racer would benefit from a smooth and peak power map.

The Dynojet Power Commander is the most well known fuel controller on the market, thanks for its capabilities and versatility. Take a look around the paddock at a track day, club racing event or AMA event, you will see the Power Commander V dominating the field.

Features:

• Compatible with PCV Secondary Fuel Module, PCV Ignition Module and PCV Quick Shifter Expansion Module
• Allows up to 24 separate fuel tables for 4 cylinder bike with a six speed transmission
• Fuel maps can be setup for optimal MPG or power
• Flip between 2 different maps on-the-fly with the PCV Map Switch (sold separately)
• 10 customizable throttle position columns
• OEM style connectors
• Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
• Reduce running temperature with additional fuel
• Made in the USA
• Dynojet C3 Mobile App allows you to communicate and adjust your installed Power Commander V
  • Available for free on Google Play
  • Enable REV X-tend
  • Configure quick shifter options
  • Calibrate throttle position
  • Requires Micro USB cable and USB to Micro USB adapter (sold separately)

Note: Dyno Power Commander V software is only compatible with a Windows PC.