Note: This item has been previously installed. Signs of installation may be present including opened packaging and minor scratches. The item may be missing tags, manuals or installation instructions, however it is fully functional.
The BoosterPlug is a true plug-and-play device that offers a stabilized enrichment of the fuel and air mixture in different ambient temperatures. To do this, the BoosterPlug uses an extra temperature sensor (and a few other components), that will work in cooperation with the original Air Intake Temperature Sensor. If you can trick the ECU to think the ambient air temperature is lower than the actual readings, the ECU will enrich the injected mixture by a certain amount. The correct enrichment will greatly improve the driveability of your bike.
The BoosterPlug is accepted worldwide, as a brilliant and affordable way to cure the fueling problems that haunts all modern fuel injected motorcycles. No need to spend a small fortune on a fuel controller plus endless dyno hours, to make your bike run as it should have from the factory. The BoosterPlug is installed in less than 10 minutes. It plugs directly into your bikes wire harness using original connectors – no cutting or splicing.
Note: Image for reference only. Actual BoosterPlug will vary depending on your bike’s make and model.
|Product Style||RevZilla Item #||Manufacturer Product #||Availability|
|BoosterPlug BPTypeF [Previously Installed]||1172875||Only 1 Left: Ships within 24 hours|
Please see our International Orders page for orders shipping outside the US.
See our full Shipping Policy for further details.
If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.
See our full Return Policy for all of the pertinent details.
Have a functionality, fit, or otherwise product-specific question about the BoosterPlug BPTypeF [Previously Installed]? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.