AltRider Crash Bars And Frame Slider Kit Ducati Multistrada 1200

Being more road-biased than other adventure touring bikes, AltRider developed a crash bar and frame slider kit specifically for the 'Strada. Sliders are consumable crash protection elements that work best on the tarmac. The crash bars on the other hand work best off-road where surface area is king. This dual defense approach provides the best protection of both worlds should you ride primarily on road or occasionally venture off. 

Made of 1 inch stainless steel, the AltRider Crash Bars and Frame Sliders are built with precision-manufactured mounts that integrate directly into the motorcycle’s frame through the motor mount. They are self-reinforced by a cross bar, and wrap protectively around the fairings, radiator and water pump. The AltRider Crash Bars are made with a shot peen satin finish, so even after the bike takes a spill the stainless bars will never show signs of rust.

Seamless installation of frame sliders rounds out an attractive and strong solution. Made from abrasion and impact resistant plastic, these sliders integrate seamlessly into the AltRider Crash Bar mount by attaching via billet aluminum offset, designed to effectively transfer the impact load to the crash bars. Because of the direct mount to the bars, the frame avoids damage that can occur in a crash when frame sliders are bolted directly to the frame itself.

The sliders utilize plastic with good lubrication and wear properties, so AltRider frame sliders can survive a longer slide than those made with other common materials. Additionally, the ability to resist impact is high, making the slider less likely to snap off or crack in a crash. We also chose to use high strength chromoly steel rod instead of commonly used all-thread or stainless steel 

Features:

• 1 inch stainless steel construction
• Hand TIG welding
• Includes frame sliders and chromoly steel bolt
• Height: 16 inches (40.6 cm)
• Width: 6 inches (15.2 cm)
• Depth: 10 inches (25.4 cm)
• Weight: 10 lbs (4.5 kg)