Log In / Register
Cart (0) Checkout
Woodcraft Solo Operation Front Stand
Select qty:
Your Savings (5%):
Your Price

LOW EFFORT - EXCELLENT CLEARANCE  Mechanics appreciate both the easy lift effort and ample workseat clearance around the front wheel!!
EXTRA DETAILS  Save that fender!!!  PVC Coated stand tip for fender scratch protection.
POWERCOAT FINISH  Woodcraft stands have one of the toughest, most expensive powder coat finishes available today.
XL WHEELS  Woodcraft's trademark extra large quad 4" wheels are extremely stable and facilitate lifting the bike on rough surfaces.
NON-SLIP BOTTOM  Another Woodcraft touch - non-slip rubber bottom skid pads.
TOTAL ADJUSTABILITY   Adjustable height upper stanchion allows use on all bikes from a RS125 to a ZX12 and accounts for variable wheel heights and fenderrances.

Requires one lift pin to be purchased separately. If you are unsure which pin you require, check the chart.

Pins are available here.

Write a Product Review for a chance to win our monthly $100 giveaways.
Woodcraft Solo Operation Front Stand 4.8 5 6 6
Very easy to use I bought this front stand to use on my Honda CBR1000RR. I had tried using a Pit Bull front hybrid stand but it didn't work well with my bike. The Woodcraft stand worked perfectly and is easy to install and remove without scratching the any parts of the bike. I purchased the 23mm to go with it as their chart specified and it is a perfect fit. November 3, 2014
Excellent Product It is one of the best items in my track trailer - to be able to swivel the front end and keep it elevated for tire warmers and maintenance is easy and very useful. Thanks. August 26, 2014
Great, but could use more safety features I get paranoid when my bike is off it's wheels. This stand uses tension screws to hold the sliding top peice stable. While this makes it higly adjustable, it comes at the cost of saftey. Over tighten the screws and you'll dent the pipes, under tighten and the stand may slide down while you're working. I don't think it's dangerous, but pins would be a much more stable solution. Also, there is no locking mechanism for the pivots. Make sure to adjust the stand such that it can't rotate back easily. Build quality and finish are phenominal November 18, 2013
Very durable and good quality The pin for the ducati 848 works seamlessly and very good quality August 5, 2013
Looks great! Makes friends jealous. Very well made front stand. Engineering is top notch. This stand will probably last longer than my racing career will. April 8, 2013
back to Woodcraft For my race bike I used to have a set of Woodcraft stands but I decided to sell sell them and buy Pitbull stands at the same time I bought the Pitbull trailer restraint system for my trailer. Although the quality of materials in Pitbull products is very good and the rear stand was good I did not like the Hybrid Forklift front stand and after using it half a dozen times decided to get rid of it. So I am back to Woodcraft stands and I am happy with them. July 30, 2012
1-6 of 6
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Woodcraft Solo Operation Front Stand? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Woodcraft Solo Operation Front Stand
Already Asked: 3 Questions, 7 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Amber C: My boyfriend did a lot of research of different stands, and this is the one that he chose do to other's reviews online/ personal experience. Sep 17, 2014
Darrin W: I've had Woodcraft stands in the past...owned several other brands more and less expensive. These stands are the best bar none. Dollar for dollar you will not find a better stand that functions properly. Mar 25, 2014
jim f: Recommended by racer friends Feb 7, 2014
abraham g: I trust Woodcraft for the craftsmanship and I have always liked their products. Dec 16, 2013
A shopper asked: would this work with a 2005 yamaha r6? Nov 18, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Jason C: Yes it will work on a 2005 R6 as long as they buy the correct size pin to go with it. I'm not sure what size pin is required on that bike. They'll need to measure the hole at the bottom of the steering head. Nov 22, 2013
Reply to Jason Good answer? Yes (0) No (0)
Jordan S: I'm not sure why revzilla can't answer their own questions.... who has time for this? Not me. Good luck Nov 18, 2013
Reply to Jordan Good answer? Yes (0) No (1)
A shopper asked: Would this fit well with Monster 796? If yes, which pin size should I choose? Aug 21, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: The Woodcraft Solo Operation Front Stand will work well with a Monster 696, 796, 1100 or 1100 EVO and requires the 27mm Pin to work. Aug 22, 2012
Reply to RevZilla Good answer? Yes (1) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Woodcraft Solo Operation Front Stand 516515 22-0100 Available: Usually ships in 3-4 business days