Log In / Register
Cart (0) Checkout
Woodcraft Rear Pad Stand
Select qty:
Your Savings (5%):
Your Price

Woodcraft Rear Pad Stand


  • Mechanics appreciate both the easy lift effort and ample working clearance behind the stand - workseat clearance is excellent behind the rear wheel!


  • Woodcraft's trademark extra large quad 4" wheels are extremely stable and facilitate both lifting the bike on rough surfaces and rolling the bike around the shop!


  • Woodcraft stands have one of the toughest, most expensive powder coat finishes available today.


  • Stainless Steel skids on the stand bottom slide easy and keep stand looking good.


  • 1" diameter solid steel lift pivots that roll smoothly and won't bend or break like other stands. The inner portion of the stand is teflon lined to keep operation smooth.


  • With a pair of pliers, the width of the Woodcraft RS102 can be adjusted in seconds!
Write a Product Review for a chance to win our monthly $100 giveaways.
Woodcraft Rear Pad Stand 5 5 7 7
Works great for a 2014 KLR 650 Was looking for a stand for maintenance without the need of spools. This one fits the bill perfectly. Very easy to lift the 432# bike. October 27, 2014
Works for me It's the price I wanted to pay for a product I wanted. I've got a '99 R6 and it works great on the rear swing arm. Easy enough for one person to stand the bike up. September 3, 2014
Perfect The Woodcraft rear pad stand is very well made. Straight forward efficient design and good quality materials. The welds are very good and the finish is good as well. The wheels are heavy duty and fit the task. The adjustment for the lift points use a simple but effective spring clap arrangement to set the width to catch the swing arms. The handle is long enough to give you enough leverage to easily lift a bike on your own. I am very pleased with the stand and now don't understand how I got a long without out one so very long. August 12, 2013
Solid Stand, Great Price This is the first stand I bought for my bike (600R) and it fits perfectly. The construction is nice and solid and the angled handle already saved me from a pinched hand. The size of the wheels does exactly as intended and allows you to set the rear wheel back down easily and gently. This is a great quality stand for a great price and I highly recommend it to anybody that is lifting by swing-arm. June 29, 2013
Great product for a great price I was torn between this stand and the pitbull (which has a reputation as the best stand out there). After reading many reviews I decided to go with the Woodcraft stand and am not disappointed. The quality of material is top notch and fits my bike (600rr) perfectly with minimal adjustment. I'd highly recommend this rear stand if you're in the market for one! April 22, 2013
As sturdy as pad stands get Best pad stand I've used. Nice thick tubing keeps the stand stable with heavy bikes and the oversize wheels make it easy to pick the bike up in a fluid motion instead of just "snapping" down. The adjustable pad area is exceptionally robust and I have no worries leaving my 520lb+ bike supported for days on end. Would definitely recommend, and look forward to purchasing Woodcraft's front stand in the future. September 10, 2012
best stand for motorcycle very nice tire stand for my Honda HRC 1000rr it was fitted to good for the bike I recommend it. May 29, 2012
1-7 of 7
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Woodcraft Rear Pad Stand? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Woodcraft Rear Pad Stand
Already Asked: 10 Questions, 18 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Casey C: Woodcraft seems to be a company that cares about quality on all of their products so I chose to reward that and go with them over the pitbull even though I think both make great stands May 17, 2014
JOSUE AMIUD L asked: Will this fit Kawasaki ninja 300 ABS? Dec 2, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Steven H: Well, I'm in Mexico for the winter so I can't toddle down to the local dealer and try it out but what I'd advise anyone, especially if they have a sport bike or anything close to it, is get a spool stand. If I had it to do over I would not have bought this for my Triumph Street Triple R. At the time, Revzilla did not sell the Woodcraft spool stand. Woodcraft makes good stuff but this, for me, has not been the best solution. Dec 2, 2014
Reply to Steven Good answer? Yes (0) No (0)
Will Y: I do believe it will, however I measured the widest adjustment is approximately 12.5", most narrow that I would trust is 10" and the width is an infinite adjustment within those measurements. At lifted position, the bottom of the fork that rests on the stand will be 13.75" from the floor surface. Dec 2, 2014
Reply to Will Good answer? Yes (0) No (0)
Michael M: Yes it will. I bought this for my 14 300 abs se Dec 3, 2014
Reply to Michael Good answer? Yes (0) No (0)
P A: Worked for me Dec 2, 2014
Reply to P Good answer? Yes (0) No (0)
A shopper asked: I'm looking to buy a stand and this looks like the perfect one! But I would like to make sure that it will fit on my 2013 Honda CBR500R, does anyone know? I'd rather not just assume it does! Feb 15, 2015
Answer this · Send to friends Good question? Yes (0) No (0)
Richard H: Works great on my CBR650F. The supports are adjustable. I didn't have to adjust the stand for my bike--as it is, the rubber support pads are about 12" between the outer edges of the support pads. From where it's set now, each support can be adjusted about 1/4" out and about 1" in (meaning the total width between the supports can increase about 1/2" wider and about 2" narrower). Feb 16, 2015
Reply to Richard Good answer? Yes (0) No (0)
Donald W: I'm not able to say it would fit a CBR500R. I use it on a KTM 690 enduro R.

Easy to go from kick stand to this stand, giving about 3 inches ground clearance. The actual lifting levers are rubber coated and very adjustable to just about any sport bike. Also provides a solid work platform for service items.

Hope this helps.
Feb 15, 2015
Reply to Donald Good answer? Yes (0) No (0)
Neil G: I have a 2013, Triumph Tiger 800 ABS and this stand works perfectly for my bike. As long as you have a dual side swing arm, it should work, I would think.

One critique of the item: The caps that hold the axles on the wheels fall off, far too often. I always to make sure they're attached or at least search for them.
Feb 15, 2015
Reply to Neil Good answer? Yes (0) No (0)
A shopper asked: What is the minimum width of this stand? I was wondering if it would fit a 2014 Honda CB500F. The width is about 11" from swingarm to swingarm... May 18, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Rod F: I think you will be fine. I bought this stand to use with my BMW F800R (for which it works great) but it adjusts narrow enough that I can easily use it with my Honda CRF250X. The width of the swingarm on the CRF is around 10", so it should work with your 11" swingarm. May 21, 2014
Reply to Rod Good answer? Yes (0) No (0)
Daniel S: I have used this on a 2013 CB500F, it worked just fine. May 21, 2014
Reply to Daniel Good answer? Yes (0) No (0)
Mike B: Definitely will work. It is a good product. May 21, 2014
Reply to Mike Good answer? Yes (0) No (0)
A shopper asked: I have 2009 zx14, will this work ? Feb 22, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Bob L: Sure will, just had an 08 ZX14 on it the other day. Honestly my favorite stand to use, especially on big bikes. Feb 23, 2014
Reply to Bob Good answer? Yes (1) No (0)
A s: I don't see why it wouldn't work. Unless the bike is some ungodly wide custom job, or it's a bike with a single side swing arm, if should work just fine. Feb 22, 2014
Reply to A Good answer? Yes (0) No (0)
Mike B: I don't know for sure. I am using it for a KLR 650 and I really like it. Can you check with the manufacturer. Feb 23, 2014
Reply to Mike Good answer? Yes (0) No (0)
A shopper asked: would this fit on a Yamaha FZ8? Aug 2, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Steven H: From looking at photos on the Yamaha website it appears it would. That said, if the bike will accept spools or spool sliders I would highly recommend getting a stand that is designed for spools. It is a bit less expensive and a more secure way of holding the bike. At the time I bought this Revzilla did not appear to carry the Woodcraft version of a spool stand. It is well-made though. Aug 2, 2014
Reply to Steven Good answer? Yes (0) No (0)
Jose A: If on the bottom of your bikes rear chassis you have those threads... You can add spools those those threads... You need to examine your bikes rear closely. If your bike has that option... It should fit... I sold this stand because It was vary difficult use this stand. I would recommend the pitbull models... If you have the money.. It is worth the investment Aug 2, 2014
Reply to Jose Good answer? Yes (0) No (0)
shushuo w asked: will this fit in to my 2014 triumph bonneville t100? what different from wood craft rear spool stand?Thanks Jun 30, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Steven H: I went down to my Triumph dealer and looked at the T100 Bonneville. I would say it will NOT work because of the mufflers getting in the way. Now if you had a Thruxton with the upswept mufflers, then yes, I think it would. I noted some bolt holes towards the middle of the lower frame, perhaps for a center stand? That would be the way I would go if they make one. Additional info about my stand is the inside width of the vertical bars is about 16.5". Subtract about another 1.5" on each side for the part that hold the padded rods and you have the approximate max inner width. Jun 30, 2014
Reply to Steven Good answer? Yes (0) No (0)
A shopper asked: Will this fit BMW K1300S? Sep 22, 2012
Answer this · Send to friends Good question? Yes (0) No (0)
RevZilla: Due to the single-sided swingarm, Woodcraft stands will not work with your bike. The K1300S needs a single-sided paddock stand with a certain diameter pin to fit inside the rear wheel axle. For the most secure fit and appropriate performance, Woodcraft recommends using the paddock stand sourced from BMW USA. Sep 26, 2012
Reply to RevZilla Good answer? Yes (0) No (0)
Ben B asked: Would this fit the cbr 125? Aug 3, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Nick B asked: Will this fit my 2014 Honda CB500F? The width is about 11" from arm to arm. May 18, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Product Style RevZilla Item # Manufacturer Product # Availability
Woodcraft Rear Pad Stand 516527 25-0200 Available: Usually ships in 3-4 business days