Please select a Fitment
to check availability, or to add this item to your Shopping Cart or Wish List.
Your Savings (10%):
Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Please select a Fitment to view availability.
Drop us your email and we'll let you know when it's in.
The complete rearset kit consists of the rearset plates, footpegs, 3 piece billet pedals and all of the needed hardware (shift rods, etc) to install the kit properly. This kit also includes a mounting point for the stock muffler. They are made from tough, aircraft grade 6061 T6 Aluminum. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd. This kit is designed for the new R6 to give you the optimum foot position and ground clearance for racing and has already been tested and tried at Daytona. In the event that you need replacement parts, any individual piece of this kit is available.
Woodcraft strikes again!
As with every other woodcraft product I have on my bike (frame sliders, clip-ons, case covers, shark guard) these are awesome. The finish and machining quality is great. Everything bolts up perfectly to the bike. They aren't adjustable, but that's fine because unless you are super tall/short they are going to put your feet where they should be for a race bike. I knocked off one point for ease of install because the directions could be better; they require some very careful reading and consideration before you act. But once you figure you what goes where they go on easy. I gave an average for durability because I haven't crashed them yet. The value is great as these are among the less expensive of race rear sets but you wouldn't know it by the product it's self. Would definitely recommend.
October 15, 2012
Worth every penny!
Lets face it, the stock rearsets dont look "horrible" and are functional enough if you dont race right? Wrong! These rearsets have a very minimalist look but look great on my R6. The higher peg mount gives me much better clearance dragging on the uneven streets too. Bang for the buck only got 4 dur to needing to buy the separate rear brake switch (if you want/need one) and finish only because I would have liked to see the accessory parts (bolts/shift rod etc) to have been anodized to match. Other than that great product!
October 8, 2012
Great product as expected from Woodcraft
Install: easy using existing SV levers. No issues. Brake light worked without additional woodcraft pressure switch or spring.
Pegs are solid as a rock. Texture on the pegs grips very well to the extent that it may tear up bottoms of shoes if they are soft - but is sure to prevent slipping off pegs (a very bad thing!).
Moves back and up from standard peg position on SV650N as stated for a very good position.
Problems: The right side does not have a heal guard. I have seen others using this product without the guard but this exposes the rear brake cylinder assembly. By filing the mounting holes on the stock guards you can mount them to protect the assembly. This restricts the heal from turning and pointing the toe of the boot out as much as the left side. Not a real problem but would have liked to see some more engineering on this point.
August 30, 2011
Have a functionality, fit, or otherwise product-specific question about the Woodcraft Complete Rearset Kit Yamaha R6 2006-2013? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.