Motion Pro Cable Luber
Does it's job.
This is a pretty basic maintenance item so there really isn't much to talk about it.
Just make sure you read the directions carefully or this job can get very messy quickly, it's already a little messy if you do it the right way any way.
January 28, 2016
Simple to use, but it is messy. Very lightweight and feels kind of cheap, but as long as it's used correctly it shouldn't break.
January 19, 2016
Makes lubing your cables much easier, and while still on the bike. Can get a little messy, so use a rag at each end of the cable.
August 10, 2015
I highly recommend this product for anyone who has anything with cables that need to move smoothly. Works great, although the seal isn't 100% -- a little oil (not much) does come out of the bottom of the tool when using it. I recommend wrapping it in a towel, just so you don't get lubricant everywhere. I used it to apply Motion Pro's cable lube to my bike's clutch cable yesterday, and I couldn't get over the difference it made. Wow. Much smoother action, very easy pull.
I will probably use this tool on every bike I own for the rest of my life.
July 26, 2015
I don't know how to even comment. It made lubing my cable so much easier. Minimal spillage but manageable. Tool is sturdy and easy to use.
June 29, 2015
Works Exactly As Needed
Like others have said, it's messy, just keep a rag at both ends, helps to have a second person if you can.
Pretty simple and easy to use, take your clutch cable end out of your lever, unscrew the two screws on the luber, make sure the little barrel on the end is sticking out of the other side, screw down the screws to clamp it down on the cable, plug the straw into the luber, wrap it in a rag, and spray. Wait for it to come out of the other end. If you're not getting anything out of the other end after lubing for a bit, try moving the cable back and forth. Took some play before mine worked it's way through.
April 2, 2014
Not 100% clean, but does the job well
The Motion Pro Cable Luber makes short work of lubing your cables. Its not 100% mess-free but it does ensure that most of the lube goes down the cable sheathing as intended. Just make sure you wrap it with a rag was you are spraying to absorb any overflow. And don't forget to put a rag at the other end as well!
December 9, 2013
A must for any hardcore cable enthusiast
Originally invented to inject steroids into the IV's of National Guard before heading off to beat down campus protestors, cable lubers have had a long, bloody history deep rooted in contemporary American culture. And since the banning of steroids after dirty hippies got tired of becoming attacked protesting manly things like war and lumberjacks, they've come along way, and are now used to make sure clutches and throttles are properly functioning.
That said, this cable luber works great. If you're tired of manually dripping oil down your lines and getting it everywhere (or an aspiring wrestler with questionable ethics), a cable luber will ensure minimum spillage of your lube of choice, be it gear oil or anabolic.
Everyone should have one of these. Thank me later.
March 12, 2012