Log In / Register
Cart (0) Checkout
Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014
Zoom
  • Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014
  • Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014
  • Carbon Fiber
  • Stainless Steel
  • Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014

Please select a Material to check availability, or to add this item to your Shopping Cart or Wish List.

Select Material:

Exhaust Type:

Select qty:
MSRP
$638.95 - $718.95
Your Savings (18%):
$115.02
Your Price
$523.93
Please select a Material to view availability.

Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013

The R-77 is a perfect match for the Ninja 300. Its styling and internal dynamics complement this new bike exceptionally well. Not only does the R-77 enhance the aggressive styling, it provides an ample boost in horsepower and torque from mid-to-peak RPMs, just where you need it.

Improving styling and performance was not our only goal. This system also significantly reduced weight over the stock system, resulting in better handling, weight distribution, and fuel economy. Tearing up track has never been so much fun.

Full System includes R-77 muffler, stainless steel header and tail-pipe, low-volume insert, installation hardware, and detailed step-by-by instructions.

NOTE: Please check local laws before purchasing a Yoshimura Exhaust. Some modifications may be prohibited in some states.

Resources:

This Product Fits:
Kawasaki
Ninja 300 2013, 2014
Ninja 300 ABS 2013, 2014
Write a Product Review for a chance to win our monthly $100 giveaways.
Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014 5 5 12 12
Awesome sound. I just love the looks and the sound of this exhaust! Add it to a filter and ecu tune and you can feel a power difference. One of the best upgrades I've done. June 25, 2014
Yoshimura Rocks I was not surprised that the Yoshi system fit great but it sounds even better. My little Ninja 300 sounds more like a 750. Really great sound and I could notice a change in performance as well. I would recommend this system to anyone with a Ninja 300. Quality cannot be beat! May 5, 2014
An absolute must have for the Ninja 300!! Install was actually a breeze. Looks awesome, sounds like a whole different animal. Installed with a Power Commander Five and it makes a really big difference. Throttle response and increase in the power bands very noticeable. April 17, 2014
Great price for a full exhaust! I bought this exhaust because the stock exhaust on the ninja 300 is too quite that it's actually dangerous to lane split. The yoshimura full exhaust makes the bike sound so sexy. It's only a 300 but it sounds pretty mean. If you're considering this exhaust, you will not be disappointed. In terms of performance, you feel like you're stressing the engine a little less when you hit those high revs. When you consider the other options available for the ninja300 how can you not choose this beautiful exhaust, it compliments the the bike perfectly. April 14, 2014
AWESOME SYSTEM This exhaust system is great especially the stainless! Install took sometime to get everything fitted correctly but there were no major issues. The exhaust sounds incredible and looks great. Quality product that I would recommend to anyone. March 17, 2014
This offered everything I wanted. This exhaust system has everything, looks, performance and sound. The install was not too difficult, as long as you know how to use a wrench you will be able to get this on . The instructions don't go into enough detail but YouTube has plenty of instructional videos to assist you. The sound is great with or without the included baffle. I can feel the weight loss on the bike when in the hill country. The bike flicks left and right even easier than before. Overall this is a great product and I will be purchasing Yoshimura exhausts for all of my bikes. January 27, 2014
Top Notch Build Quality There are many full exhaust systems from reputable manufacturers out there, however, I doubt that any achieve the build quality, fit and finish of Yoshi. Their units are simply beautiful! Installation was what you would expect - under 2 hours for me. Just follow the instructions and you'll find that everything fits exactly. Performance? Surprisingly good. Seriously, I didn't expect this much of a boost. The price at Revzilla was the best out there and delivery was super fast. August 27, 2013
Very nice carbon fiber exhaust extremely satisfied check it out on IG search the tag ninja 300 Installation was fairly easy if you have done an exhaust before it is kinda of hard putting the headers on cuz the bolts wont line up took me about 10 mintues but after that everything else was pretty easy sounds amazing and will smell a little at first but goes away :p June 25, 2013
2 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Yoshimura R-77 Exhaust System Kawasaki Ninja 300 2013-2014
Already Asked: 7 Questions, 28 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
ELISEO A: Added a few HP, get noticed. Jun 13, 2014
Drucilla Y: Yoshimura is a quality brand. I love this exhaust. May 20, 2014
Andrew R: Heard this was a great exhaust for the Kawasaki EX 300 May 16, 2014
Richard C: I wanted the carbon fiber and the performance gains on the bike are real! Apr 15, 2014
andrew G: bought exhuast here before and shipping was fast plus my papi bought it for me!! Mar 25, 2014
Lance H: Great reviews, trusted name, and great sound/look. also good boost of HP when combined with the Power Commander V Feb 19, 2014
Michael B: Better power and sound and looks. Feb 10, 2014
A shopper asked: Does it fit the 2014 ninja 300 abs model? Sep 24, 2013
Answer this · Send to friends Good question? Yes (2) No (0)
Daniel Z: I installed mine on a 2013 non-abs, however, I can't think of any part of the exhaust system that would even come close to the ABS moving parts.

If you want to verify, Yoshi is located in S. Cal. and can be reached at 1-800-634-9166.

I think you'll like the exhaust - the fit and finish is absolutely beautiful. The sound is... well... music.
Sep 24, 2013
Reply to Daniel Good answer? Yes (2) No (0)
Dave N: Yes, perfect Fit !!! No problem! Sep 24, 2013
Reply to Dave Good answer? Yes (0) No (0)
A shopper asked: Thinking about purchasing this for my 300... 1. I have not much mechanical experience ( I can change a battery and I installed the seal cowl), is this easy enough to do myself? If I do purchase and install, does the bike need to be re-tuned, and is that something the shop could do? Mar 1, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Daniel Z: You should be able to do it yourself with no problems - just take your time and pay careful attention to the instructions.

A couple of hints;

You just need to remove the right side lower fairing.
Do not start tightening bolts until all the new components are attached.
Look carefully at the instructions for where the gold spacer on the rear bracket goes.
If you are using the baffle, install it in the muffler before you put the muffler on the bike.
If you can, borrow (or buy) a torque wrench for tightening down the 4 header bolts to the cylinders.

To get the most out of your Yoshi, you should probably have your ECU flashed. I used Flash-Tune ($100 on an exchange basis). The removal and installation is quite easy - about the same as installation of a new battery. The ECU sits in a rubber jacket right behind your battery.

The Yoshi / ECU combination is, IMO, very impressive.

Good luck!
Mar 1, 2014
Reply to Daniel Good answer? Yes (0) No (0)
nicolas p: Install is surprisingly easy. Just take your time and make sure you don't lose any bolts (like I did) and you should get it all done in less than two hours. I had very little experience and it went very easy. I recommend you get a re-tune in order to get the maximum performance but it is not a necessity. Runs fine without. Depends on the shop if they can do it. You could also buy a fuel controller and do this yourself and this will also allow you to retune again if any more aftermarket parts are added. Mar 1, 2014
Reply to nicolas Good answer? Yes (0) No (0)
Chip h: Yeah you have to flash tune your ecu or you can install a tuner kit like the powercommander 5 but dont worry its fairley simple just wire up the tuner after you find defalt map for r77. The headers were hardest part requires a little force maby mine were spaced tighter. You dont actually have to remove gas tank to install tuner i proped mine up with 2x4 and connected wires. its a stright foward install that im sure you can do. The fender elimator is actually harder in my opnion.
Mar 2, 2014
Reply to Chip Good answer? Yes (0) No (0)
A S: You really don't need to have awesome mechanical skills. All you need to able to do is to remove lower side right fairing, remove and install literary 3 bolts. You will also need to flash your ECU (I did mine with flash tune) or get piggy back system like power commander V or juice box. This will increase your power gain and reduce the flat spot. All torque specs and everything else can be found in service manual. Mar 1, 2014
Reply to A Good answer? Yes (0) No (0)
Alexander T: I bought this a few months ago for my 300. I had no experience previously besides changing oil, tires and what not. If you take your time I'm sure almost anyone could do it. Also I don't think it requires a tune but this is something you may want to discuss with a professional mechanic.

Hope that helps.. Btw te exhaust sounds amazing. Very clean but loud enough.
Mar 2, 2014
Reply to Alexander Good answer? Yes (0) No (0)
Chip h: If you dont tune your ecu you wont unlock the full potential of a full system. But yes you can install without tuning. You would be better off just getting a slip on if you dont plan on tuning Mar 2, 2014
Reply to Chip Good answer? Yes (0) No (0)
Multi-Systems Programming & C: Easy to install yourself. No tuning afterwards required. Mar 1, 2014
Terry D asked: Does this product come with the exhaust bracket? Or do you have to buy it severalty? Jul 24, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Daniel Z: For my 2013 non-abs it came with everything I needed. You use the stock bracket (with a spacer provided by Yoshi) and the existing exhaust gaskets. Jul 24, 2014
Reply to Daniel Good answer? Yes (0) No (0)
Dave N: Hello , the exhaust bracket in stainless steel is included and fit perfect ! Don't worry, Is the best exhaust system for Ninja 300 Aug 4, 2014
Reply to Dave Good answer? Yes (0) No (0)
Christopher H: You have to buy the exhaust bracket seperately, but it's definitely worth the money. Jul 24, 2014
Reply to Christopher Good answer? Yes (0) No (0)
Bridget M: The full system came with everything needed for installation. Jul 24, 2014
Reply to Bridget Good answer? Yes (0) No (0)
Alexander T: This came with the bracket Jul 24, 2014
Reply to Alexander Good answer? Yes (0) No (0)
A S: Comes with a bracket Jul 24, 2014
Reply to A Good answer? Yes (0) No (0)
A shopper asked: Does anyone know if there is a place on the header to put an O2 sensor from the PCV auto tuner? Or would I have to weld this new header? Thanks in advanced. Dec 19, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Daniel Z: No place for an O2 sensor on the one I installed on my 2013 Ninja 300.

In case it helps, I recall that there was a discussion of this issue in the Ninja 300 forums at kawasakininja300.

On a side-note, the R77 is a very nice upgrade for the 300.
Dec 20, 2013
Reply to Daniel Good answer? Yes (0) No (0)
Chip h: You have to drill and weld a o2 bung if you want to install auto tuner. I believe the bungs come with auto tuner Mar 2, 2014
Reply to Chip Good answer? Yes (0) No (0)
john g asked: SPECIFICATIONS AND SHIPPING

Good afternoon.
I AM VERY INTERESTED IN PURCHASING THIS ARTICLE, BUT BEFORE DESIRE TO CONFIRM ANY INFORMATION YOU.
1. YOSHIMURA EXHAUST PIPE COMES WITH FULL? THIS IS COMPLETE SYSTEM?
2. EXHAUST MUFFLER COMES WITH REMOVABLE?
3. MAKE YOU SEND THIS ARTICLE TO BOGOTA-COLOMBIA?
4. COULD CONFIRM THE DIMENSIONS AND WEIGHT OF THE BOX IN WHICH SENT THE ARTICLE?
May 14, 2014
Answer this · Send to friends Good question? Yes (0) No (0)
Jon F: It is a full exhaust headers back. And if by muffler removable you mean the silencer insert then yes. It comes uninstalled. Not sure about shipping, but the box was about 1ft x 1ft x 3ft if I remember correctly. May 29, 2014
Reply to Jon Good answer? Yes (0) No (0)
Product Style RevZilla SKU ID Manufacturer Product # Availability
Stainless Steel / Full System 872218 147000J520 In Stock: Usually ships in 1-2 business days
Carbon Fiber / Full System 872217 147000J220 In Stock: Usually ships in 1-2 business days