Log In / Register
Cart (0) Checkout
Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012
  • Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012
  • Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012
  • Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012

Please select a to check availability, or to add this item to your Shopping Cart or Wish List.


Select qty:
Your Savings (17%):
Your Price
Please select a to view availability.

Yoshimura Fender Eliminator Kit Yamaha WR250R 08-12 / WR250X 11-12 

Yoshimura has always been synonymous with quality craftsmanship, precision fitment, and impeccable quality. Their Fender Eliminator Kits are no exception and they are sure to give your bike the sleek race look every rider craves.

These kits feature a precision laser cut stainless bracket that tucks discreetly under the tail section of the bike, as well as a clear-lens taillight. Completing the kit is an anodized aluminum license plate frame which features a silk screened Yoshimura logo.

Note: Please check local laws before purchasing. Some modifications may be prohibited in some states.


This Product Fits:
WR250R 20082013
WR250X 2011, 2012
Write a Product Review for a chance to win our monthly $100 giveaways.
Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012 4.7 5 54 54
nice! Excellent product!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! July 11, 2014
Great fit and finish INstalled on a 2014 DR-Z400SM. The fit and finish are excellent, and the installation was mostly simple. The only two things to note: 1) The instructions must be for a previous or alternate version because the wire colors do not match the actual product. So for the running light, brake light, and ground wires, you need to just test until you find the right combination (not hard). 2) since i had to try a few different configurations in the harness (you need to reuse the stock wire harness), I actually pulled one wire out of it's connector, but that was fixed by putting it back in and tightening the connector to the wire a bit with a crimper. Very small issues though. Once installed, it is very functional, fitment is perfect, and build quality is what you'd expect from Yoshimura. July 11, 2014
Very Clean This really cleaned up the tail of my bike, without leaving it looking naked or janky. The fit and finish and use of flexible signal mounts give it an almost factory look, while just improving the overall look. The price is a little high for what basically amounts to a mounting bracket, frame, and hard rubber posts. Also, the sheet metal is a little weak, and the signal post mounts are very easy to bend. July 9, 2014
Yoshi does it again Yoshimura nuff said. Put this on when I got my new tail light easy as can be. Only thing that I had to use my brain on at all was the tag light. Had to cut two wires and crimp them thats it. For bolts in the tail and for on the license plate and I was good to go. July 7, 2014
nice, but doesn't fit australian plates.. I still think this is the best looking fender eliminator kit available for the ninja 300. The LEDs look great, the kit is minimalist and stylish, but sadly it doesn't fit Australian plates. The instructions were also pretty terrible. Still, If I had the plates to fit, i'd definitely keep this kit. July 7, 2014
Too Flimsey This fender eliminator would work good if you never went offroad. It's mounted in a very weak location. If you happen to ride on some washboard dirt roads, I think it will destroy itself. I reinforced it by adding some bracing. The components are very well made, and fit well though. the taillight itself looks to be very fragile. I'll give it a try, I don't have time right now to try a different one. Time will tell. May 19, 2014
So much cleaner looking Anything is better then stock, and this is a very nice eliminator, I am happy I purchased it. It is a bit of a pain to install, but a word of advice (lubricate the rubber ends of the turn signals to help push them through the bracket). I would definitely recommend this for both looks and weight savings. June 25, 2014
Great quality All parts are top notch quality. Looks great on bike. Turn signals are very hard to install into supplied brackets but will go in eventually. Note to Canadian riders from BC...our licences plates are slightly bigger than what the product is designed for. Either some modification is required, or you'll have to use the licence plate frame in behind your plate to hold the brackets in place. June 16, 2014
2 3 4 5 ... 7 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012 ? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Yoshimura Fender Eliminator Kit Yamaha WR250R 2008-2013 / WR250X 2011-2012
Already Asked: 2 Questions, 3 Answers
Sort by:
RevZilla Store asked: Why did you choose this?
Joe G: only decent one available Apr 30, 2014
Bryan R: Cleans up the back of the bike and saves some weight. Looks way better than factory and is well made. Aug 17, 2013
Product Style RevZilla SKU ID Manufacturer Product # Availability
Black 872197 070BG133000 Available: Usually ships in 1-2 business days