Log In / Register
0 Checkout
We're sorry but this product is currently out of stock. You can be notified of its arrival by entering your email in the yellow box below.
Out of Stock
Vance & Hines Fuelpak For Harley Dyna, Softail, V-Rod, And XR 2004-2012 [Previously Installed]
  • Vance & Hines Fuelpak For Harley Dyna, Softail, V-Rod, And XR 2004-2012 [Previously Installed]
Savings (33%):

Select qty:

Add to Wish List

Video Review

Vance & Hines Fuelpak For Harley Dyna, Softail, V-Rod, And XR 2004-2012 [Previously Installed] Videos

Note: This item has been previously opened and/or installed. Signs of installation may be present including opened packaging and minor scratches, however item is functional and contents are complete.

Vance & Hines Fuelpak For Softail, Sportster, and V-Rod

Your fuel injected bike is equipped with an ECU (electronic control unit) that's programmed to deliver fuel to the motor based on an air/fuel ratio for a stock air filter and stock exhaust system. While the ECU can self-adjust for environmental factors such as temperature and altitude, it can't adjust for mechanical changes like adding performance parts. When you install a performance exhaust system, your airflow changes, so you need a fuel management system that adjusts your air/fuel ratio to match the changes. That fuel management system is Fuelpak. The perfect combination with your performance exhaust system.

The fuelpack plugs directly into the factory wiring harness and ECU using a t-tap and OEM style connectors to stay fastened securely to your bike. Vance and Hine's focus was on making installation and use as simple as possible.

Vance & Hines Fuelpak Features:

  • Throttle position sensor-based system simplifies the process of fuel injection tuning
  • Enables you to fine tune the fuel mixture throughout the entire RPM range with the touch of a button
  • Increases power and improves throttle response
  • Very user friendly
  • Plugs into the existing harness on the bike
  • No computer or software is required
  • Simply punch in the values supplied with the Fuelpak
  • Values supplied are for use with Vance & Hines exhaust systems
  • Fuelpack will also work with other exhaust systems (contact V&H tech support for tuning information)
  • Includes all necessary mounting hardware

Fitment Notes & Exceptions

  • Not legal for sale or use on pollution controlled vehicles
  • Requires the use of a high performance air filter
Product Style RevZilla Item # Manufacturer Product # Availability
Vance & Hines Fuelpak For Harley Dyna, Softail, V-Rod, And XR 2004-2012 [Previously Installed] 948030 61005B Out of Stock


Orders $39.99 and over qualify for our fast free shipping offer. Click Here for FREE Shipping Terms and Conditions.

Please see our International Orders page for orders shipping outside the US.

We show real-time availability on this product page when you select the size/color item you want.  Most items will ship the same business day an order is placed,however if an item requires additional processing time a message will be shown indicating such.

See our full Shipping Policy for further details.


If your order arrives and it is not right, we will we'll fix it, NO NONSENSE, we promise.

Doesn't fit or just not happy with it? You can return any new, unused and unaltered item within 30 business days of delivery receipt of your item. We will issue a full refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Write a Product Review for a chance to win our monthly $100 giveaways.
Vance & Hines Fuelpak For Harley Dyna / Softail / V-Rod / XR 2004-2012 4.6 5 8 8
Great product, easy to install, Once you have the correct mapping figured out the most difficult issue is finding a place to mount the addition plugs for the unit, I ended up leaving the top off my air box.... July 5, 2016
Great product Great support from Revzilla and Vance and Hines. Easy to install and program. Works great. June 14, 2016
This product is user friendly for the less experienced. The Vance and Hines fuelpak was easy to install and the directions were very helpful. Programming the fuelpak was simple however when you get to the last mode for entering number values you should not go to the NA modes and then turn off the ignition to save the program. At the last program entry required STOP, turn the ignition switch off and then on to save the entered values for the modes. At my first attempt I did not stop and went through the NA modes. The bike would not start. The directions do not say to STOP. When I repeated the modes and values and stopped at the modes marked NA the bike started right up and ran great. Another suggestion is to watch Utube on how to install the Vance and Hines Fuelpak in the XR1200. This showed me exactly what to do. So, between the directions that came with the fuelpak and Utube I was successful. The Vance and Hines Fuelpak fI website was very easy to use in order to download the required mode values based on the bike you own. When I asked a question regarding a new slipon muffler I had purchased they were prompt and thorough in answering my question. Great company to deal with. Thank You February 2, 2016
Exactly what I waa looking for. This was easy to install. Completely plug and play. Great customer support from the company too. I had a unique set up that didn't show on the website to get the proper fuel map. I emailed the company to ask them for help. Within a hour I had a custom fuel map, and was on the road 20 minutes later! October 26, 2015
Serves it purpose on an XR1200 I bought the Fuel Pak for my 2009 XR1200 for the Vance and Hines Black Widows pipes and K & N filter that was installed on the bike. It helped eliminate a good bit of the back popping but I felt it could run a little better but for price its not a bad buy, product doesn't really have a lot of adjustment features other than the ability to manually input the map but you have to get the map from the Vance and Hines website so you really can't do a dyno because only Vance and Hines knows what the variables mean. March 2, 2015
This product was easy to install and I got exactly what I was hoping for Easy install, great looking product. Vance and Hines always leaves me impressed August 5, 2014
a must have add on simple installation if you follow the instructions - the results are immediate and you can tell how much better the motor runs. July 21, 2014
one beer project Worked on first try, still working today. I received fast and accurate Hines support because my pipes had no marking. Fuel map was dead on perfect match. Engine performs like it was hand tuned on a Dyno! Exhaust pops 99% fixed, accelerating and torque response stepped up, and no starting issues. The best picture I can make for you is : you wish the factory could deliver new bikes like this. A street cam would really be the next way to go,after the fuel pak. June 16, 2014
1-8 of 8
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Vance & Hines Fuelpak For Harley Dyna, Softail, V-Rod, And XR 2004-2012 [Previously Installed]? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.