Certain option combinations (sizes, colors, fitments, etc.) are more expensive than others.
In this case the option is more expensive than the base price,
so a price adjustment of has been added to Your Price.
Drop us your email and we'll let you know when it's in.
very affordable and good quality
very affordable, great product, it was my first time packing a muffler,so it was challenging, a video tutorial would help. other than that i saved money by doing it myself.
June 30, 2014
Have a functionality, fit, or otherwise product-specific question about the Two Brothers Repack Kit for Road Mufflers? Ask it here!
If you have a customer service or shipping question, please direct it to our Customer Service department.
Ryan W:There is no Torx Wrench or O rings in this kit. It just has the fiberglass mat, the rivets, and the drill bit. If you need the bolts, there is a separate hardware pack you would have to get. I had to get it too...
The only other thing i will mention is that to increase the life of the packing they recommend using stainless steel wool to cover the perforated cylinder that you would wrap the fiberglass mat around. It helps dissipate the pulses from the exhaust, and allows the mat to not be blown out as fast.
**Only use stainless!!!! Regular steel wool burns up!!!**Aug 21, 2014
Michael G:It is Two Brothers Original. It does not include the wrench or o-rings. It is just packing material and rivets. I recommend getting new torx bolts along with this as they are aluminum and soft. I had to drill 1 out and I've been riding around short 1 end cap bolt. Aug 21, 2014
Terry R:I repacked my 2006 R1,, and had just enough to do the two cans. But they were the GYTR aftermarket pipes, which are a little shorter. If you have the stock cans, you might need two.May 29, 2014
Taylor R:If by O-rings you means the rivets yes they are. The only thing needed for repacking the exhaust is a rivet gun of the correct sizing. I believe a small set from a local hardware store would include a little pilot bit but I don't quite remember. Then just follow the instructions.Apr 13, 2014
Ryan B:No, my kit did not come with the o-rings that they recommend you replace. Mine didn't look so bad, so I left them. I did needed to replace some of the steel wool, so you might want to have some handy. Still haven't had a chance to test it out yet. Apr 12, 2014
A shopper asked:i just installed this canister to my 2012 yamaha fz1, it sounds great, my question is if there is any way to make it a little quieter? i do a lot of long distance riding and think it may get annoying over the long hauls, thanks APJan 1, 2015
Noel T:Two Bros also sell a P1 "PowerTip" sound suppressor for their exhaust systems. Easy install, just pop it into the end cap. It made a difference for me. Quieter pipe, and no significant loss in hp.Jan 1, 2015