Log In / Register
Cart (0) Checkout
Shogun Protection Kits
Zoom
  • Shogun Protection Kits
  • Shogun Protection Kits
  • Shogun Protection Kits
  • Shogun Protection Kits

This product is bike-specific
Please click on "Select your bike" below to purchase the part that will fit.

First select your bike:

Select qty:
MSRP
$79.95 - $214.95
Your Savings (10%):
$8.00
Price
$71.95 - $206.95
The price depends on which ride you select. Select your ride to continue.

Shogun Protection Kits

Shogun Complete Protection Kits includes matching bar ends, frame sliders, and swingarm spools.  Shogun sliders are superior to other slider brands by virtue of their construction and material. Shogun pucks, bar ends and spools are made of a shatter proof UHMW infused with UV protective polymer. Shogun sliders absorb kinetic energy from crashes and will not shatter in cold temperature like some types of Delrin or fade in the sun. Each slider has a press fit aluminum bushing (excluding bar ends) to hold it in place during impact to reduce the risk of the slider puck or spool tearing off of the mounting point. Shogun frame slider offsets are CNC machined from the same grade aluminum as military aircraft. Offsets are anodized black to match OEM components. Each offset is manufactured to stringent specifications with ISO 9000 quality control.

Each Shogun Frame Slider comes with high tensile strength corrosion resistant hardware (cheap imitators do not use high grade hardware and will quickly rust). Shogun uses socket head bolts in nearly every kit, allowing for stronger frame slider design in a more compact space. Newer applications of Shogun Frame Sliders make use of a counter sunk design, which distributes the force of impact over a wider area and gives additional strength to the system so that the puck remains attached to the motorcycle.

This Product Fits:
Write a Product Review for a chance to win our monthly $100 giveaways.
Shogun Protection Kits 4.5 5 27 27
Worth it I bought a set of these for my 2014 R6, unfortunately I got T-boned by a truck and had to put these to the test. They saved a lot of my plastics, but I got hit hard enough to where the tires lifted off the ground and my bike received some damaged. The damage would've been way worse without these though. They definitely saved a few thousand in damage. Needless to say, I ordered another set and put it on already. The reason I gave it 4 stars is because I wish the swing arm sliders were longer. Since they are pretty short, my exhaust was damaged in the accident. July 23, 2014
Easy install New to street bikes I decided to install these myself on the Ninja 300. I ran into a couple hiccups with the bolts but noticed when I didn't use a service stand they slid right in. Other than that, It was very easy to do and I couldn't be happier with quality. Side note: Make sure you view a Youtube video or download a manual/instructions, it was not provided. June 17, 2014
Great kit Hopefully I won't put this to a test. I put the sliders on a 250r that my son is going to learn to ride on. Simple installation. Things fit. June 2, 2014
Slider ends Bent with first tip over Installed on 2013 Ninja 300. Slight cutting is required. Not any better than the sliders half the price. With the first tip-over slider-end bent and cracked my fairiing. Save your money does not provide as much protection as you think. May 23, 2014
Great! No Cut option the no cut sliders were not hard to install, If you put a jack under the motor for support. I do not recommend installing the handle bar ends, Unless you don't mind a lot of vibration. All and all great deal. May 8, 2014
easy install I bought this kit because I didn't want to cut on the bike's bodywork and it looks like it will be protective. I hope I don't have to try it out. As far as the installation goes, It is pretty easy to install the frame sliders. The kit does not come with instructions so you have to go online for instructions or watch a youtube video showing the install. One problem I had is that I thought the bolts for the pucks were too short. I called Revzilla and spoke to Phillip who I must say is great! He contacted Shogun for me and they explained to him that the pucks have a bushing that need to be pushed in with a socket and rubber mallet. After that, the pucks went on just fine. It would be nice if Shogun included instructions and little tips like that so I didn't have to waste Phillip's time with such a simple fix. I would not have thought that the bushing would need to be pushed in further than it is from factory because you can't tell that is needed without very close inspection. The lack of directions and little tips that would have avoided a phone call to customer service is the only reason I gave it 4 stars which is Shogun's fault because they do not include instructions with their products. April 2, 2014
Look good and hope to never use them Bought the no cut slider kit for my 2013 R6. Install was a breeze, no need to remove any plastics. Took 15 mins to finish install. Hopefully I don't need to ever use them but its peace of mind that they are there just in case plus that don't look too awful. March 31, 2014
Shogun Frame Sliders FTW If you ride then you MUST have frame sliders. Shogun saved my 2007 R6 from being totaled when I was in an accident on the freeway and it was a no brainer when I got my 2014 R1 March 5, 2014
2 3 4 next>>
Use our Product Q&A for a chance to win our monthly $100 giveaways.

Have a functionality, fit, or otherwise product-specific question about the Shogun Protection Kits? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.

Shogun Protection Kits
Already Asked: 2 Questions, 2 Answers
Sort by:
A shopper asked: Hi there, I've looked around but haven't been able to find sliders that fitmy honda cbr500r. Does this or any other product sold by revzilla fit them?

Thanks
Oct 4, 2013
Answer this · Send to friends Good question? Yes (0) No (0)
Rod D: The kits available on Revzilla does not list and CBR500R bikes as compatible. It does list multiple years of the CBR600R as compatible. I purchased the kit for a 2013 ZX636R and it utilizes the frame bolt locations to mount the slider pucks (no offset bracket mount). I believe the CBR500R would require an offset bracket to mount the puck so you would not have to cut the fairings.

Revzilla did list a Yoshimure frame slider set for the CBR500F. Not knowing what year your bike is, I would not be able to tell you if this Yosh kit will fit a CBR500R.
Oct 8, 2013
Reply to Rod Good answer? Yes (0) No (0)